Viewing file:  tcpm.h (6.46 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Copyright 2015-2017 Google, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __LINUX_USB_TCPM_H
#define __LINUX_USB_TCPM_H
#include <linux/bitops.h>
#include <linux/usb/typec.h>
#include "pd.h"
enum typec_cc_status {
TYPEC_CC_OPEN,
TYPEC_CC_RA,
TYPEC_CC_RD,
TYPEC_CC_RP_DEF,
TYPEC_CC_RP_1_5,
TYPEC_CC_RP_3_0,
};
enum typec_cc_polarity {
TYPEC_POLARITY_CC1,
TYPEC_POLARITY_CC2,
};
/* Time to wait for TCPC to complete transmit */
#define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */
#define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10)
enum tcpm_transmit_status {
TCPC_TX_SUCCESS = 0,
TCPC_TX_DISCARDED = 1,
TCPC_TX_FAILED = 2,
};
enum tcpm_transmit_type {
TCPC_TX_SOP = 0,
TCPC_TX_SOP_PRIME = 1,
TCPC_TX_SOP_PRIME_PRIME = 2,
TCPC_TX_SOP_DEBUG_PRIME = 3,
TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4,
TCPC_TX_HARD_RESET = 5,
TCPC_TX_CABLE_RESET = 6,
TCPC_TX_BIST_MODE_2 = 7
};
/**
* struct tcpc_config - Port configuration
* @src_pdo: PDO parameters sent to port partner as response to
* PD_CTRL_GET_SOURCE_CAP message
* @nr_src_pdo: Number of entries in @src_pdo
* @snk_pdo: PDO parameters sent to partner as response to
* PD_CTRL_GET_SINK_CAP message
* @nr_snk_pdo: Number of entries in @snk_pdo
* @max_snk_mv: Maximum acceptable sink voltage in mV
* @max_snk_ma: Maximum sink current in mA
* @max_snk_mw: Maximum required sink power in mW
* @operating_snk_mw:
* Required operating sink power in mW
* @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or
* TYPEC_PORT_DRP)
* @default_role:
* Default port role (TYPEC_SINK or TYPEC_SOURCE).
* Set to TYPEC_NO_PREFERRED_ROLE if no default role.
* @try_role_hw:True if try.{Src,Snk} is implemented in hardware
* @alt_modes: List of supported alternate modes
*/
struct tcpc_config {
const u32 *src_pdo;
unsigned int nr_src_pdo;
const u32 *snk_pdo;
unsigned int nr_snk_pdo;
const u32 *snk_vdo;
unsigned int nr_snk_vdo;
unsigned int max_snk_mv;
unsigned int max_snk_ma;
unsigned int max_snk_mw;
unsigned int operating_snk_mw;
enum typec_port_type type;
enum typec_role default_role;
bool try_role_hw; /* try.{src,snk} implemented in hardware */
const struct typec_altmode_desc *alt_modes;
};
enum tcpc_usb_switch {
TCPC_USB_SWITCH_CONNECT,
TCPC_USB_SWITCH_DISCONNECT,
};
/* Mux state attributes */
#define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */
#define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */
#define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */
/* Mux modes, decoded to attributes */
enum tcpc_mux_mode {
TYPEC_MUX_NONE = 0, /* Open switch */
TYPEC_MUX_USB = TCPC_MUX_USB_ENABLED, /* USB only */
TYPEC_MUX_DP = TCPC_MUX_DP_ENABLED, /* DP only */
TYPEC_MUX_DOCK = TCPC_MUX_USB_ENABLED | /* Both USB and DP */
TCPC_MUX_DP_ENABLED,
};
struct tcpc_mux_dev {
int (*set)(struct tcpc_mux_dev *dev, enum tcpc_mux_mode mux_mode,
enum tcpc_usb_switch usb_config,
enum typec_cc_polarity polarity);
bool dfp_only;
void *priv_data;
};
/**
* struct tcpc_dev - Port configuration and callback functions
* @config: Pointer to port configuration
* @get_vbus: Called to read current VBUS state
* @get_current_limit:
* Optional; called by the tcpm core when configured as a snk
* and cc=Rp-def. This allows the tcpm to provide a fallback
* current-limit detection method for the cc=Rp-def case.
* For example, some tcpcs may include BC1.2 charger detection
* and use that in this case.
* @set_cc: Called to set value of CC pins
* @get_cc: Called to read current CC pin values
* @set_polarity:
* Called to set polarity
* @set_vconn: Called to enable or disable VCONN
* @set_vbus: Called to enable or disable VBUS
* @set_current_limit:
* Optional; called to set current limit as negotiated
* with partner.
* @set_pd_rx: Called to enable or disable reception of PD messages
* @set_roles: Called to set power and data roles
* @start_drp_toggling:
* Optional; if supported by hardware, called to start DRP
* toggling. DRP toggling is stopped automatically if
* a connection is established.
* @try_role: Optional; called to set a preferred role
* @pd_transmit:Called to transmit PD message
* @mux: Pointer to multiplexer data
*/
struct tcpc_dev {
const struct tcpc_config *config;
int (*init)(struct tcpc_dev *dev);
int (*get_vbus)(struct tcpc_dev *dev);
int (*get_current_limit)(struct tcpc_dev *dev);
int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc);
int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1,
enum typec_cc_status *cc2);
int (*set_polarity)(struct tcpc_dev *dev,
enum typec_cc_polarity polarity);
int (*set_vconn)(struct tcpc_dev *dev, bool on);
int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge);
int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv);
int (*set_pd_rx)(struct tcpc_dev *dev, bool on);
int (*set_roles)(struct tcpc_dev *dev, bool attached,
enum typec_role role, enum typec_data_role data);
int (*start_drp_toggling)(struct tcpc_dev *dev,
enum typec_cc_status cc);
int (*try_role)(struct tcpc_dev *dev, int role);
int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
const struct pd_message *msg);
struct tcpc_mux_dev *mux;
};
struct tcpm_port;
struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc);
void tcpm_unregister_port(struct tcpm_port *port);
void tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
unsigned int nr_pdo);
void tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo,
unsigned int nr_pdo,
unsigned int max_snk_mv,
unsigned int max_snk_ma,
unsigned int max_snk_mw,
unsigned int operating_snk_mw);
void tcpm_vbus_change(struct tcpm_port *port);
void tcpm_cc_change(struct tcpm_port *port);
void tcpm_pd_receive(struct tcpm_port *port,
const struct pd_message *msg);
void tcpm_pd_transmit_complete(struct tcpm_port *port,
enum tcpm_transmit_status status);
void tcpm_pd_hard_reset(struct tcpm_port *port);
void tcpm_tcpc_reset(struct tcpm_port *port);
#endif /* __LINUX_USB_TCPM_H */
|