Viewing file:  lsm_hooks.h (88.04 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Linux Security Module interfaces
*
* Copyright (C) 2001 WireX Communications, Inc <chris@wirex.com>
* Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (C) 2001 Networks Associates Technology, Inc <ssmalley@nai.com>
* Copyright (C) 2001 James Morris <jmorris@intercode.com.au>
* Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group)
* Copyright (C) 2015 Intel Corporation.
* Copyright (C) 2015 Casey Schaufler <casey@schaufler-ca.com>
* Copyright (C) 2016 Mellanox Techonologies
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Due to this file being licensed under the GPL there is controversy over
* whether this permits you to write a module that #includes this file
* without placing your module under the GPL. Please consult a lawyer for
* advice before doing this.
*
*/
#ifndef __LINUX_LSM_HOOKS_H
#define __LINUX_LSM_HOOKS_H
#include <linux/security.h>
#include <linux/init.h>
#include <linux/rculist.h>
/**
* union security_list_options - Linux Security Module hook function list
*
* Security hooks for program execution operations.
*
* @bprm_set_creds:
* Save security information in the bprm->security field, typically based
* on information about the bprm->file, for later use by the apply_creds
* hook. This hook may also optionally check permissions (e.g. for
* transitions between security domains).
* This hook may be called multiple times during a single execve, e.g. for
* interpreters. The hook can tell whether it has already been called by
* checking to see if @bprm->security is non-NULL. If so, then the hook
* may decide either to retain the security information saved earlier or
* to replace it. The hook must set @bprm->secureexec to 1 if a "secure
* exec" has happened as a result of this hook call. The flag is used to
* indicate the need for a sanitized execution environment, and is also
* passed in the ELF auxiliary table on the initial stack to indicate
* whether libc should enable secure mode.
* @bprm contains the linux_binprm structure.
* Return 0 if the hook is successful and permission is granted.
* @bprm_check_security:
* This hook mediates the point when a search for a binary handler will
* begin. It allows a check the @bprm->security value which is set in the
* preceding set_creds call. The primary difference from set_creds is
* that the argv list and envp list are reliably available in @bprm. This
* hook may be called multiple times during a single execve; and in each
* pass set_creds is called first.
* @bprm contains the linux_binprm structure.
* Return 0 if the hook is successful and permission is granted.
* @bprm_committing_creds:
* Prepare to install the new security attributes of a process being
* transformed by an execve operation, based on the old credentials
* pointed to by @current->cred and the information set in @bprm->cred by
* the bprm_set_creds hook. @bprm points to the linux_binprm structure.
* This hook is a good place to perform state changes on the process such
* as closing open file descriptors to which access will no longer be
* granted when the attributes are changed. This is called immediately
* before commit_creds().
* @bprm_committed_creds:
* Tidy up after the installation of the new security attributes of a
* process being transformed by an execve operation. The new credentials
* have, by this point, been set to @current->cred. @bprm points to the
* linux_binprm structure. This hook is a good place to perform state
* changes on the process such as clearing out non-inheritable signal
* state. This is called immediately after commit_creds().
*
* Security hooks for filesystem operations.
*
* @sb_alloc_security:
* Allocate and attach a security structure to the sb->s_security field.
* The s_security field is initialized to NULL when the structure is
* allocated.
* @sb contains the super_block structure to be modified.
* Return 0 if operation was successful.
* @sb_free_security:
* Deallocate and clear the sb->s_security field.
* @sb contains the super_block structure to be modified.
* @sb_statfs:
* Check permission before obtaining filesystem statistics for the @mnt
* mountpoint.
* @dentry is a handle on the superblock for the filesystem.
* Return 0 if permission is granted.
* @sb_mount:
* Check permission before an object specified by @dev_name is mounted on
* the mount point named by @nd. For an ordinary mount, @dev_name
* identifies a device if the file system type requires a device. For a
* remount (@flags & MS_REMOUNT), @dev_name is irrelevant. For a
* loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
* pathname of the object being mounted.
* @dev_name contains the name for object being mounted.
* @path contains the path for mount point object.
* @type contains the filesystem type.
* @flags contains the mount flags.
* @data contains the filesystem-specific data.
* Return 0 if permission is granted.
* @sb_copy_data:
* Allow mount option data to be copied prior to parsing by the filesystem,
* so that the security module can extract security-specific mount
* options cleanly (a filesystem may modify the data e.g. with strsep()).
* This also allows the original mount data to be stripped of security-
* specific options to avoid having to make filesystems aware of them.
* @type the type of filesystem being mounted.
* @orig the original mount data copied from userspace.
* @copy copied data which will be passed to the security module.
* Returns 0 if the copy was successful.
* @sb_remount:
* Extracts security system specific mount options and verifies no changes
* are being made to those options.
* @sb superblock being remounted
* @data contains the filesystem-specific data.
* Return 0 if permission is granted.
* @sb_umount:
* Check permission before the @mnt file system is unmounted.
* @mnt contains the mounted file system.
* @flags contains the unmount flags, e.g. MNT_FORCE.
* Return 0 if permission is granted.
* @sb_pivotroot:
* Check permission before pivoting the root filesystem.
* @old_path contains the path for the new location of the
* current root (put_old).
* @new_path contains the path for the new root (new_root).
* Return 0 if permission is granted.
* @sb_set_mnt_opts:
* Set the security relevant mount options used for a superblock
* @sb the superblock to set security mount options for
* @opts binary data structure containing all lsm mount data
* @sb_clone_mnt_opts:
* Copy all security options from a given superblock to another
* @oldsb old superblock which contain information to clone
* @newsb new superblock which needs filled in
* @sb_parse_opts_str:
* Parse a string of security data filling in the opts structure
* @options string containing all mount options known by the LSM
* @opts binary data structure usable by the LSM
* @dentry_init_security:
* Compute a context for a dentry as the inode is not yet available
* since NFSv4 has no label backed by an EA anyway.
* @dentry dentry to use in calculating the context.
* @mode mode used to determine resource type.
* @name name of the last path component used to create file
* @ctx pointer to place the pointer to the resulting context in.
* @ctxlen point to place the length of the resulting context.
* @dentry_create_files_as:
* Compute a context for a dentry as the inode is not yet available
* and set that context in passed in creds so that new files are
* created using that context. Context is calculated using the
* passed in creds and not the creds of the caller.
* @dentry dentry to use in calculating the context.
* @mode mode used to determine resource type.
* @name name of the last path component used to create file
* @old creds which should be used for context calculation
* @new creds to modify
*
*
* Security hooks for inode operations.
*
* @inode_alloc_security:
* Allocate and attach a security structure to @inode->i_security. The
* i_security field is initialized to NULL when the inode structure is
* allocated.
* @inode contains the inode structure.
* Return 0 if operation was successful.
* @inode_free_security:
* @inode contains the inode structure.
* Deallocate the inode security structure and set @inode->i_security to
* NULL.
* @inode_init_security:
* Obtain the security attribute name suffix and value to set on a newly
* created inode and set up the incore security field for the new inode.
* This hook is called by the fs code as part of the inode creation
* transaction and provides for atomic labeling of the inode, unlike
* the post_create/mkdir/... hooks called by the VFS. The hook function
* is expected to allocate the name and value via kmalloc, with the caller
* being responsible for calling kfree after using them.
* If the security module does not use security attributes or does
* not wish to put a security attribute on this particular inode,
* then it should return -EOPNOTSUPP to skip this processing.
* @inode contains the inode structure of the newly created inode.
* @dir contains the inode structure of the parent directory.
* @qstr contains the last path component of the new object
* @name will be set to the allocated name suffix (e.g. selinux).
* @value will be set to the allocated attribute value.
* @len will be set to the length of the value.
* Returns 0 if @name and @value have been successfully set,
* -EOPNOTSUPP if no security attribute is needed, or
* -ENOMEM on memory allocation failure.
* @inode_create:
* Check permission to create a regular file.
* @dir contains inode structure of the parent of the new file.
* @dentry contains the dentry structure for the file to be created.
* @mode contains the file mode of the file to be created.
* Return 0 if permission is granted.
* @inode_link:
* Check permission before creating a new hard link to a file.
* @old_dentry contains the dentry structure for an existing
* link to the file.
* @dir contains the inode structure of the parent directory
* of the new link.
* @new_dentry contains the dentry structure for the new link.
* Return 0 if permission is granted.
* @path_link:
* Check permission before creating a new hard link to a file.
* @old_dentry contains the dentry structure for an existing link
* to the file.
* @new_dir contains the path structure of the parent directory of
* the new link.
* @new_dentry contains the dentry structure for the new link.
* Return 0 if permission is granted.
* @inode_unlink:
* Check the permission to remove a hard link to a file.
* @dir contains the inode structure of parent directory of the file.
* @dentry contains the dentry structure for file to be unlinked.
* Return 0 if permission is granted.
* @path_unlink:
* Check the permission to remove a hard link to a file.
* @dir contains the path structure of parent directory of the file.
* @dentry contains the dentry structure for file to be unlinked.
* Return 0 if permission is granted.
* @inode_symlink:
* Check the permission to create a symbolic link to a file.
* @dir contains the inode structure of parent directory of
* the symbolic link.
* @dentry contains the dentry structure of the symbolic link.
* @old_name contains the pathname of file.
* Return 0 if permission is granted.
* @path_symlink:
* Check the permission to create a symbolic link to a file.
* @dir contains the path structure of parent directory of
* the symbolic link.
* @dentry contains the dentry structure of the symbolic link.
* @old_name contains the pathname of file.
* Return 0 if permission is granted.
* @inode_mkdir:
* Check permissions to create a new directory in the existing directory
* associated with inode structure @dir.
* @dir contains the inode structure of parent of the directory
* to be created.
* @dentry contains the dentry structure of new directory.
* @mode contains the mode of new directory.
* Return 0 if permission is granted.
* @path_mkdir:
* Check permissions to create a new directory in the existing directory
* associated with path structure @path.
* @dir contains the path structure of parent of the directory
* to be created.
* @dentry contains the dentry structure of new directory.
* @mode contains the mode of new directory.
* Return 0 if permission is granted.
* @inode_rmdir:
* Check the permission to remove a directory.
* @dir contains the inode structure of parent of the directory
* to be removed.
* @dentry contains the dentry structure of directory to be removed.
* Return 0 if permission is granted.
* @path_rmdir:
* Check the permission to remove a directory.
* @dir contains the path structure of parent of the directory to be
* removed.
* @dentry contains the dentry structure of directory to be removed.
* Return 0 if permission is granted.
* @inode_mknod:
* Check permissions when creating a special file (or a socket or a fifo
* file created via the mknod system call). Note that if mknod operation
* is being done for a regular file, then the create hook will be called
* and not this hook.
* @dir contains the inode structure of parent of the new file.
* @dentry contains the dentry structure of the new file.
* @mode contains the mode of the new file.
* @dev contains the device number.
* Return 0 if permission is granted.
* @path_mknod:
* Check permissions when creating a file. Note that this hook is called
* even if mknod operation is being done for a regular file.
* @dir contains the path structure of parent of the new file.
* @dentry contains the dentry structure of the new file.
* @mode contains the mode of the new file.
* @dev contains the undecoded device number. Use new_decode_dev() to get
* the decoded device number.
* Return 0 if permission is granted.
* @inode_rename:
* Check for permission to rename a file or directory.
* @old_dir contains the inode structure for parent of the old link.
* @old_dentry contains the dentry structure of the old link.
* @new_dir contains the inode structure for parent of the new link.
* @new_dentry contains the dentry structure of the new link.
* Return 0 if permission is granted.
* @path_rename:
* Check for permission to rename a file or directory.
* @old_dir contains the path structure for parent of the old link.
* @old_dentry contains the dentry structure of the old link.
* @new_dir contains the path structure for parent of the new link.
* @new_dentry contains the dentry structure of the new link.
* Return 0 if permission is granted.
* @path_chmod:
* Check for permission to change DAC's permission of a file or directory.
* @dentry contains the dentry structure.
* @mnt contains the vfsmnt structure.
* @mode contains DAC's mode.
* Return 0 if permission is granted.
* @path_chown:
* Check for permission to change owner/group of a file or directory.
* @path contains the path structure.
* @uid contains new owner's ID.
* @gid contains new group's ID.
* Return 0 if permission is granted.
* @path_chroot:
* Check for permission to change root directory.
* @path contains the path structure.
* Return 0 if permission is granted.
* @inode_readlink:
* Check the permission to read the symbolic link.
* @dentry contains the dentry structure for the file link.
* Return 0 if permission is granted.
* @inode_follow_link:
* Check permission to follow a symbolic link when looking up a pathname.
* @dentry contains the dentry structure for the link.
* @inode contains the inode, which itself is not stable in RCU-walk
* @rcu indicates whether we are in RCU-walk mode.
* Return 0 if permission is granted.
* @inode_permission:
* Check permission before accessing an inode. This hook is called by the
* existing Linux permission function, so a security module can use it to
* provide additional checking for existing Linux permission checks.
* Notice that this hook is called when a file is opened (as well as many
* other operations), whereas the file_security_ops permission hook is
* called when the actual read/write operations are performed.
* @inode contains the inode structure to check.
* @mask contains the permission mask.
* Return 0 if permission is granted.
* @inode_setattr:
* Check permission before setting file attributes. Note that the kernel
* call to notify_change is performed from several locations, whenever
* file attributes change (such as when a file is truncated, chown/chmod
* operations, transferring disk quotas, etc).
* @dentry contains the dentry structure for the file.
* @attr is the iattr structure containing the new file attributes.
* Return 0 if permission is granted.
* @path_truncate:
* Check permission before truncating a file.
* @path contains the path structure for the file.
* Return 0 if permission is granted.
* @inode_getattr:
* Check permission before obtaining file attributes.
* @path contains the path structure for the file.
* Return 0 if permission is granted.
* @inode_setxattr:
* Check permission before setting the extended attributes
* @value identified by @name for @dentry.
* Return 0 if permission is granted.
* @inode_post_setxattr:
* Update inode security field after successful setxattr operation.
* @value identified by @name for @dentry.
* @inode_getxattr:
* Check permission before obtaining the extended attributes
* identified by @name for @dentry.
* Return 0 if permission is granted.
* @inode_listxattr:
* Check permission before obtaining the list of extended attribute
* names for @dentry.
* Return 0 if permission is granted.
* @inode_removexattr:
* Check permission before removing the extended attribute
* identified by @name for @dentry.
* Return 0 if permission is granted.
* @inode_getsecurity:
* Retrieve a copy of the extended attribute representation of the
* security label associated with @name for @inode via @buffer. Note that
* @name is the remainder of the attribute name after the security prefix
* has been removed. @alloc is used to specify of the call should return a
* value via the buffer or just the value length Return size of buffer on
* success.
* @inode_setsecurity:
* Set the security label associated with @name for @inode from the
* extended attribute value @value. @size indicates the size of the
* @value in bytes. @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
* Note that @name is the remainder of the attribute name after the
* security. prefix has been removed.
* Return 0 on success.
* @inode_listsecurity:
* Copy the extended attribute names for the security labels
* associated with @inode into @buffer. The maximum size of @buffer
* is specified by @buffer_size. @buffer may be NULL to request
* the size of the buffer required.
* Returns number of bytes used/required on success.
* @inode_need_killpriv:
* Called when an inode has been changed.
* @dentry is the dentry being changed.
* Return <0 on error to abort the inode change operation.
* Return 0 if inode_killpriv does not need to be called.
* Return >0 if inode_killpriv does need to be called.
* @inode_killpriv:
* The setuid bit is being removed. Remove similar security labels.
* Called with the dentry->d_inode->i_mutex held.
* @dentry is the dentry being changed.
* Return 0 on success. If error is returned, then the operation
* causing setuid bit removal is failed.
* @inode_getsecid:
* Get the secid associated with the node.
* @inode contains a pointer to the inode.
* @secid contains a pointer to the location where result will be saved.
* In case of failure, @secid will be set to zero.
* @inode_copy_up:
* A file is about to be copied up from lower layer to upper layer of
* overlay filesystem. Security module can prepare a set of new creds
* and modify as need be and return new creds. Caller will switch to
* new creds temporarily to create new file and release newly allocated
* creds.
* @src indicates the union dentry of file that is being copied up.
* @new pointer to pointer to return newly allocated creds.
* Returns 0 on success or a negative error code on error.
* @inode_copy_up_xattr:
* Filter the xattrs being copied up when a unioned file is copied
* up from a lower layer to the union/overlay layer.
* @name indicates the name of the xattr.
* Returns 0 to accept the xattr, 1 to discard the xattr, -EOPNOTSUPP if
* security module does not know about attribute or a negative error code
* to abort the copy up. Note that the caller is responsible for reading
* and writing the xattrs as this hook is merely a filter.
*
* Security hooks for file operations
*
* @file_permission:
* Check file permissions before accessing an open file. This hook is
* called by various operations that read or write files. A security
* module can use this hook to perform additional checking on these
* operations, e.g. to revalidate permissions on use to support privilege
* bracketing or policy changes. Notice that this hook is used when the
* actual read/write operations are performed, whereas the
* inode_security_ops hook is called when a file is opened (as well as
* many other operations).
* Caveat: Although this hook can be used to revalidate permissions for
* various system call operations that read or write files, it does not
* address the revalidation of permissions for memory-mapped files.
* Security modules must handle this separately if they need such
* revalidation.
* @file contains the file structure being accessed.
* @mask contains the requested permissions.
* Return 0 if permission is granted.
* @file_alloc_security:
* Allocate and attach a security structure to the file->f_security field.
* The security field is initialized to NULL when the structure is first
* created.
* @file contains the file structure to secure.
* Return 0 if the hook is successful and permission is granted.
* @file_free_security:
* Deallocate and free any security structures stored in file->f_security.
* @file contains the file structure being modified.
* @file_ioctl:
* @file contains the file structure.
* @cmd contains the operation to perform.
* @arg contains the operational arguments.
* Check permission for an ioctl operation on @file. Note that @arg
* sometimes represents a user space pointer; in other cases, it may be a
* simple integer value. When @arg represents a user space pointer, it
* should never be used by the security module.
* Return 0 if permission is granted.
* @mmap_addr :
* Check permissions for a mmap operation at @addr.
* @addr contains virtual address that will be used for the operation.
* Return 0 if permission is granted.
* @mmap_file :
* Check permissions for a mmap operation. The @file may be NULL, e.g.
* if mapping anonymous memory.
* @file contains the file structure for file to map (may be NULL).
* @reqprot contains the protection requested by the application.
* @prot contains the protection that will be applied by the kernel.
* @flags contains the operational flags.
* Return 0 if permission is granted.
* @file_mprotect:
* Check permissions before changing memory access permissions.
* @vma contains the memory region to modify.
* @reqprot contains the protection requested by the application.
* @prot contains the protection that will be applied by the kernel.
* Return 0 if permission is granted.
* @file_lock:
* Check permission before performing file locking operations.
* Note: this hook mediates both flock and fcntl style locks.
* @file contains the file structure.
* @cmd contains the posix-translated lock operation to perform
* (e.g. F_RDLCK, F_WRLCK).
* Return 0 if permission is granted.
* @file_fcntl:
* Check permission before allowing the file operation specified by @cmd
* from being performed on the file @file. Note that @arg sometimes
* represents a user space pointer; in other cases, it may be a simple
* integer value. When @arg represents a user space pointer, it should
* never be used by the security module.
* @file contains the file structure.
* @cmd contains the operation to be performed.
* @arg contains the operational arguments.
* Return 0 if permission is granted.
* @file_set_fowner:
* Save owner security information (typically from current->security) in
* file->f_security for later use by the send_sigiotask hook.
* @file contains the file structure to update.
* Return 0 on success.
* @file_send_sigiotask:
* Check permission for the file owner @fown to send SIGIO or SIGURG to the
* process @tsk. Note that this hook is sometimes called from interrupt.
* Note that the fown_struct, @fown, is never outside the context of a
* struct file, so the file structure (and associated security information)
* can always be obtained: container_of(fown, struct file, f_owner)
* @tsk contains the structure of task receiving signal.
* @fown contains the file owner information.
* @sig is the signal that will be sent. When 0, kernel sends SIGIO.
* Return 0 if permission is granted.
* @file_receive:
* This hook allows security modules to control the ability of a process
* to receive an open file descriptor via socket IPC.
* @file contains the file structure being received.
* Return 0 if permission is granted.
* @file_open:
* Save open-time permission checking state for later use upon
* file_permission, and recheck access if anything has changed
* since inode_permission.
*
* Security hooks for task operations.
*
* @task_alloc:
* @task task being allocated.
* @clone_flags contains the flags indicating what should be shared.
* Handle allocation of task-related resources.
* Returns a zero on success, negative values on failure.
* @task_free:
* @task task about to be freed.
* Handle release of task-related resources. (Note that this can be called
* from interrupt context.)
* @cred_alloc_blank:
* @cred points to the credentials.
* @gfp indicates the atomicity of any memory allocations.
* Only allocate sufficient memory and attach to @cred such that
* cred_transfer() will not get ENOMEM.
* @cred_free:
* @cred points to the credentials.
* Deallocate and clear the cred->security field in a set of credentials.
* @cred_prepare:
* @new points to the new credentials.
* @old points to the original credentials.
* @gfp indicates the atomicity of any memory allocations.
* Prepare a new set of credentials by copying the data from the old set.
* @cred_transfer:
* @new points to the new credentials.
* @old points to the original credentials.
* Transfer data from original creds to new creds
* @kernel_act_as:
* Set the credentials for a kernel service to act as (subjective context).
* @new points to the credentials to be modified.
* @secid specifies the security ID to be set
* The current task must be the one that nominated @secid.
* Return 0 if successful.
* @kernel_create_files_as:
* Set the file creation context in a set of credentials to be the same as
* the objective context of the specified inode.
* @new points to the credentials to be modified.
* @inode points to the inode to use as a reference.
* The current task must be the one that nominated @inode.
* Return 0 if successful.
* @kernel_module_request:
* Ability to trigger the kernel to automatically upcall to userspace for
* userspace to load a kernel module with the given name.
* @kmod_name name of the module requested by the kernel
* Return 0 if successful.
* @kernel_read_file:
* Read a file specified by userspace.
* @file contains the file structure pointing to the file being read
* by the kernel.
* @id kernel read file identifier
* Return 0 if permission is granted.
* @kernel_post_read_file:
* Read a file specified by userspace.
* @file contains the file structure pointing to the file being read
* by the kernel.
* @buf pointer to buffer containing the file contents.
* @size length of the file contents.
* @id kernel read file identifier
* Return 0 if permission is granted.
* @task_fix_setuid:
* Update the module's state after setting one or more of the user
* identity attributes of the current process. The @flags parameter
* indicates which of the set*uid system calls invoked this hook. If
* @new is the set of credentials that will be installed. Modifications
* should be made to this rather than to @current->cred.
* @old is the set of credentials that are being replaces
* @flags contains one of the LSM_SETID_* values.
* Return 0 on success.
* @task_setpgid:
* Check permission before setting the process group identifier of the
* process @p to @pgid.
* @p contains the task_struct for process being modified.
* @pgid contains the new pgid.
* Return 0 if permission is granted.
* @task_getpgid:
* Check permission before getting the process group identifier of the
* process @p.
* @p contains the task_struct for the process.
* Return 0 if permission is granted.
* @task_getsid:
* Check permission before getting the session identifier of the process
* @p.
* @p contains the task_struct for the process.
* Return 0 if permission is granted.
* @task_getsecid:
* Retrieve the security identifier of the process @p.
* @p contains the task_struct for the process and place is into @secid.
* In case of failure, @secid will be set to zero.
*
* @task_setnice:
* Check permission before setting the nice value of @p to @nice.
* @p contains the task_struct of process.
* @nice contains the new nice value.
* Return 0 if permission is granted.
* @task_setioprio
* Check permission before setting the ioprio value of @p to @ioprio.
* @p contains the task_struct of process.
* @ioprio contains the new ioprio value
* Return 0 if permission is granted.
* @task_getioprio
* Check permission before getting the ioprio value of @p.
* @p contains the task_struct of process.
* Return 0 if permission is granted.
* @task_prlimit:
* Check permission before getting and/or setting the resource limits of
* another task.
* @cred points to the cred structure for the current task.
* @tcred points to the cred structure for the target task.
* @flags contains the LSM_PRLIMIT_* flag bits indicating whether the
* resource limits are being read, modified, or both.
* Return 0 if permission is granted.
* @task_setrlimit:
* Check permission before setting the resource limits of process @p
* for @resource to @new_rlim. The old resource limit values can
* be examined by dereferencing (p->signal->rlim + resource).
* @p points to the task_struct for the target task's group leader.
* @resource contains the resource whose limit is being set.
* @new_rlim contains the new limits for @resource.
* Return 0 if permission is granted.
* @task_setscheduler:
* Check permission before setting scheduling policy and/or parameters of
* process @p based on @policy and @lp.
* @p contains the task_struct for process.
* @policy contains the scheduling policy.
* @lp contains the scheduling parameters.
* Return 0 if permission is granted.
* @task_getscheduler:
* Check permission before obtaining scheduling information for process
* @p.
* @p contains the task_struct for process.
* Return 0 if permission is granted.
* @task_movememory
* Check permission before moving memory owned by process @p.
* @p contains the task_struct for process.
* Return 0 if permission is granted.
* @task_kill:
* Check permission before sending signal @sig to @p. @info can be NULL,
* the constant 1, or a pointer to a siginfo structure. If @info is 1 or
* SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
* from the kernel and should typically be permitted.
* SIGIO signals are handled separately by the send_sigiotask hook in
* file_security_ops.
* @p contains the task_struct for process.
* @info contains the signal information.
* @sig contains the signal value.
* @secid contains the sid of the process where the signal originated
* Return 0 if permission is granted.
* @task_prctl:
* Check permission before performing a process control operation on the
* current process.
* @option contains the operation.
* @arg2 contains a argument.
* @arg3 contains a argument.
* @arg4 contains a argument.
* @arg5 contains a argument.
* Return -ENOSYS if no-one wanted to handle this op, any other value to
* cause prctl() to return immediately with that value.
* @task_to_inode:
* Set the security attributes for an inode based on an associated task's
* security attributes, e.g. for /proc/pid inodes.
* @p contains the task_struct for the task.
* @inode contains the inode structure for the inode.
*
* Security hooks for Netlink messaging.
*
* @netlink_send:
* Save security information for a netlink message so that permission
* checking can be performed when the message is processed. The security
* information can be saved using the eff_cap field of the
* netlink_skb_parms structure. Also may be used to provide fine
* grained control over message transmission.
* @sk associated sock of task sending the message.
* @skb contains the sk_buff structure for the netlink message.
* Return 0 if the information was successfully saved and message
* is allowed to be transmitted.
*
* Security hooks for Unix domain networking.
*
* @unix_stream_connect:
* Check permissions before establishing a Unix domain stream connection
* between @sock and @other.
* @sock contains the sock structure.
* @other contains the peer sock structure.
* @newsk contains the new sock structure.
* Return 0 if permission is granted.
* @unix_may_send:
* Check permissions before connecting or sending datagrams from @sock to
* @other.
* @sock contains the socket structure.
* @other contains the peer socket structure.
* Return 0 if permission is granted.
*
* The @unix_stream_connect and @unix_may_send hooks were necessary because
* Linux provides an alternative to the conventional file name space for Unix
* domain sockets. Whereas binding and connecting to sockets in the file name
* space is mediated by the typical file permissions (and caught by the mknod
* and permission hooks in inode_security_ops), binding and connecting to
* sockets in the abstract name space is completely unmediated. Sufficient
* control of Unix domain sockets in the abstract name space isn't possible
* using only the socket layer hooks, since we need to know the actual target
* socket, which is not looked up until we are inside the af_unix code.
*
* Security hooks for socket operations.
*
* @socket_create:
* Check permissions prior to creating a new socket.
* @family contains the requested protocol family.
* @type contains the requested communications type.
* @protocol contains the requested protocol.
* @kern set to 1 if a kernel socket.
* Return 0 if permission is granted.
* @socket_post_create:
* This hook allows a module to update or allocate a per-socket security
* structure. Note that the security field was not added directly to the
* socket structure, but rather, the socket security information is stored
* in the associated inode. Typically, the inode alloc_security hook will
* allocate and and attach security information to
* sock->inode->i_security. This hook may be used to update the
* sock->inode->i_security field with additional information that wasn't
* available when the inode was allocated.
* @sock contains the newly created socket structure.
* @family contains the requested protocol family.
* @type contains the requested communications type.
* @protocol contains the requested protocol.
* @kern set to 1 if a kernel socket.
* @socket_bind:
* Check permission before socket protocol layer bind operation is
* performed and the socket @sock is bound to the address specified in the
* @address parameter.
* @sock contains the socket structure.
* @address contains the address to bind to.
* @addrlen contains the length of address.
* Return 0 if permission is granted.
* @socket_connect:
* Check permission before socket protocol layer connect operation
* attempts to connect socket @sock to a remote address, @address.
* @sock contains the socket structure.
* @address contains the address of remote endpoint.
* @addrlen contains the length of address.
* Return 0 if permission is granted.
* @socket_listen:
* Check permission before socket protocol layer listen operation.
* @sock contains the socket structure.
* @backlog contains the maximum length for the pending connection queue.
* Return 0 if permission is granted.
* @socket_accept:
* Check permission before accepting a new connection. Note that the new
* socket, @newsock, has been created and some information copied to it,
* but the accept operation has not actually been performed.
* @sock contains the listening socket structure.
* @newsock contains the newly created server socket for connection.
* Return 0 if permission is granted.
* @socket_sendmsg:
* Check permission before transmitting a message to another socket.
* @sock contains the socket structure.
* @msg contains the message to be transmitted.
* @size contains the size of message.
* Return 0 if permission is granted.
* @socket_recvmsg:
* Check permission before receiving a message from a socket.
* @sock contains the socket structure.
* @msg contains the message structure.
* @size contains the size of message structure.
* @flags contains the operational flags.
* Return 0 if permission is granted.
* @socket_getsockname:
* Check permission before the local address (name) of the socket object
* @sock is retrieved.
* @sock contains the socket structure.
* Return 0 if permission is granted.
* @socket_getpeername:
* Check permission before the remote address (name) of a socket object
* @sock is retrieved.
* @sock contains the socket structure.
* Return 0 if permission is granted.
* @socket_getsockopt:
* Check permissions before retrieving the options associated with socket
* @sock.
* @sock contains the socket structure.
* @level contains the protocol level to retrieve option from.
* @optname contains the name of option to retrieve.
* Return 0 if permission is granted.
* @socket_setsockopt:
* Check permissions before setting the options associated with socket
* @sock.
* @sock contains the socket structure.
* @level contains the protocol level to set options for.
* @optname contains the name of the option to set.
* Return 0 if permission is granted.
* @socket_shutdown:
* Checks permission before all or part of a connection on the socket
* @sock is shut down.
* @sock contains the socket structure.
* @how contains the flag indicating how future sends and receives
* are handled.
* Return 0 if permission is granted.
* @socket_sock_rcv_skb:
* Check permissions on incoming network packets. This hook is distinct
* from Netfilter's IP input hooks since it is the first time that the
* incoming sk_buff @skb has been associated with a particular socket, @sk.
* Must not sleep inside this hook because some callers hold spinlocks.
* @sk contains the sock (not socket) associated with the incoming sk_buff.
* @skb contains the incoming network data.
* @socket_getpeersec_stream:
* This hook allows the security module to provide peer socket security
* state for unix or connected tcp sockets to userspace via getsockopt
* SO_GETPEERSEC. For tcp sockets this can be meaningful if the
* socket is associated with an ipsec SA.
* @sock is the local socket.
* @optval userspace memory where the security state is to be copied.
* @optlen userspace int where the module should copy the actual length
* of the security state.
* @len as input is the maximum length to copy to userspace provided
* by the caller.
* Return 0 if all is well, otherwise, typical getsockopt return
* values.
* @socket_getpeersec_dgram:
* This hook allows the security module to provide peer socket security
* state for udp sockets on a per-packet basis to userspace via
* getsockopt SO_GETPEERSEC. The application must first have indicated
* the IP_PASSSEC option via getsockopt. It can then retrieve the
* security state returned by this hook for a packet via the SCM_SECURITY
* ancillary message type.
* @skb is the skbuff for the packet being queried
* @secdata is a pointer to a buffer in which to copy the security data
* @seclen is the maximum length for @secdata
* Return 0 on success, error on failure.
* @sk_alloc_security:
* Allocate and attach a security structure to the sk->sk_security field,
* which is used to copy security attributes between local stream sockets.
* @sk_free_security:
* Deallocate security structure.
* @sk_clone_security:
* Clone/copy security structure.
* @sk_getsecid:
* Retrieve the LSM-specific secid for the sock to enable caching
* of network authorizations.
* @sock_graft:
* Sets the socket's isec sid to the sock's sid.
* @inet_conn_request:
* Sets the openreq's sid to socket's sid with MLS portion taken
* from peer sid.
* @inet_csk_clone:
* Sets the new child socket's sid to the openreq sid.
* @inet_conn_established:
* Sets the connection's peersid to the secmark on skb.
* @secmark_relabel_packet:
* check if the process should be allowed to relabel packets to
* the given secid
* @security_secmark_refcount_inc
* tells the LSM to increment the number of secmark labeling rules loaded
* @security_secmark_refcount_dec
* tells the LSM to decrement the number of secmark labeling rules loaded
* @req_classify_flow:
* Sets the flow's sid to the openreq sid.
* @tun_dev_alloc_security:
* This hook allows a module to allocate a security structure for a TUN
* device.
* @security pointer to a security structure pointer.
* Returns a zero on success, negative values on failure.
* @tun_dev_free_security:
* This hook allows a module to free the security structure for a TUN
* device.
* @security pointer to the TUN device's security structure
* @tun_dev_create:
* Check permissions prior to creating a new TUN device.
* @tun_dev_attach_queue:
* Check permissions prior to attaching to a TUN device queue.
* @security pointer to the TUN device's security structure.
* @tun_dev_attach:
* This hook can be used by the module to update any security state
* associated with the TUN device's sock structure.
* @sk contains the existing sock structure.
* @security pointer to the TUN device's security structure.
* @tun_dev_open:
* This hook can be used by the module to update any security state
* associated with the TUN device's security structure.
* @security pointer to the TUN devices's security structure.
*
* Security hooks for Infiniband
*
* @ib_pkey_access:
* Check permission to access a pkey when modifing a QP.
* @subnet_prefix the subnet prefix of the port being used.
* @pkey the pkey to be accessed.
* @sec pointer to a security structure.
* @ib_endport_manage_subnet:
* Check permissions to send and receive SMPs on a end port.
* @dev_name the IB device name (i.e. mlx4_0).
* @port_num the port number.
* @sec pointer to a security structure.
* @ib_alloc_security:
* Allocate a security structure for Infiniband objects.
* @sec pointer to a security structure pointer.
* Returns 0 on success, non-zero on failure
* @ib_free_security:
* Deallocate an Infiniband security structure.
* @sec contains the security structure to be freed.
*
* Security hooks for XFRM operations.
*
* @xfrm_policy_alloc_security:
* @ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy
* Database used by the XFRM system.
* @sec_ctx contains the security context information being provided by
* the user-level policy update program (e.g., setkey).
* Allocate a security structure to the xp->security field; the security
* field is initialized to NULL when the xfrm_policy is allocated.
* Return 0 if operation was successful (memory to allocate, legal context)
* @gfp is to specify the context for the allocation
* @xfrm_policy_clone_security:
* @old_ctx contains an existing xfrm_sec_ctx.
* @new_ctxp contains a new xfrm_sec_ctx being cloned from old.
* Allocate a security structure in new_ctxp that contains the
* information from the old_ctx structure.
* Return 0 if operation was successful (memory to allocate).
* @xfrm_policy_free_security:
* @ctx contains the xfrm_sec_ctx
* Deallocate xp->security.
* @xfrm_policy_delete_security:
* @ctx contains the xfrm_sec_ctx.
* Authorize deletion of xp->security.
* @xfrm_state_alloc:
* @x contains the xfrm_state being added to the Security Association
* Database by the XFRM system.
* @sec_ctx contains the security context information being provided by
* the user-level SA generation program (e.g., setkey or racoon).
* Allocate a security structure to the x->security field; the security
* field is initialized to NULL when the xfrm_state is allocated. Set the
* context to correspond to sec_ctx. Return 0 if operation was successful
* (memory to allocate, legal context).
* @xfrm_state_alloc_acquire:
* @x contains the xfrm_state being added to the Security Association
* Database by the XFRM system.
* @polsec contains the policy's security context.
* @secid contains the secid from which to take the mls portion of the
* context.
* Allocate a security structure to the x->security field; the security
* field is initialized to NULL when the xfrm_state is allocated. Set the
* context to correspond to secid. Return 0 if operation was successful
* (memory to allocate, legal context).
* @xfrm_state_free_security:
* @x contains the xfrm_state.
* Deallocate x->security.
* @xfrm_state_delete_security:
* @x contains the xfrm_state.
* Authorize deletion of x->security.
* @xfrm_policy_lookup:
* @ctx contains the xfrm_sec_ctx for which the access control is being
* checked.
* @fl_secid contains the flow security label that is used to authorize
* access to the policy xp.
* @dir contains the direction of the flow (input or output).
* Check permission when a flow selects a xfrm_policy for processing
* XFRMs on a packet. The hook is called when selecting either a
* per-socket policy or a generic xfrm policy.
* Return 0 if permission is granted, -ESRCH otherwise, or -errno
* on other errors.
* @xfrm_state_pol_flow_match:
* @x contains the state to match.
* @xp contains the policy to check for a match.
* @fl contains the flow to check for a match.
* Return 1 if there is a match.
* @xfrm_decode_session:
* @skb points to skb to decode.
* @secid points to the flow key secid to set.
* @ckall says if all xfrms used should be checked for same secid.
* Return 0 if ckall is zero or all xfrms used have the same secid.
*
* Security hooks affecting all Key Management operations
*
* @key_alloc:
* Permit allocation of a key and assign security data. Note that key does
* not have a serial number assigned at this point.
* @key points to the key.
* @flags is the allocation flags
* Return 0 if permission is granted, -ve error otherwise.
* @key_free:
* Notification of destruction; free security data.
* @key points to the key.
* No return value.
* @key_permission:
* See whether a specific operational right is granted to a process on a
* key.
* @key_ref refers to the key (key pointer + possession attribute bit).
* @cred points to the credentials to provide the context against which to
* evaluate the security data on the key.
* @perm describes the combination of permissions required of this key.
* Return 0 if permission is granted, -ve error otherwise.
* @key_getsecurity:
* Get a textual representation of the security context attached to a key
* for the purposes of honouring KEYCTL_GETSECURITY. This function
* allocates the storage for the NUL-terminated string and the caller
* should free it.
* @key points to the key to be queried.
* @_buffer points to a pointer that should be set to point to the
* resulting string (if no label or an error occurs).
* Return the length of the string (including terminating NUL) or -ve if
* an error.
* May also return 0 (and a NULL buffer pointer) if there is no label.
*
* Security hooks affecting all System V IPC operations.
*
* @ipc_permission:
* Check permissions for access to IPC
* @ipcp contains the kernel IPC permission structure
* @flag contains the desired (requested) permission set
* Return 0 if permission is granted.
* @ipc_getsecid:
* Get the secid associated with the ipc object.
* @ipcp contains the kernel IPC permission structure.
* @secid contains a pointer to the location where result will be saved.
* In case of failure, @secid will be set to zero.
*
* Security hooks for individual messages held in System V IPC message queues
* @msg_msg_alloc_security:
* Allocate and attach a security structure to the msg->security field.
* The security field is initialized to NULL when the structure is first
* created.
* @msg contains the message structure to be modified.
* Return 0 if operation was successful and permission is granted.
* @msg_msg_free_security:
* Deallocate the security structure for this message.
* @msg contains the message structure to be modified.
*
* Security hooks for System V IPC Message Queues
*
* @msg_queue_alloc_security:
* Allocate and attach a security structure to the
* msq->q_perm.security field. The security field is initialized to
* NULL when the structure is first created.
* @msq contains the message queue structure to be modified.
* Return 0 if operation was successful and permission is granted.
* @msg_queue_free_security:
* Deallocate security structure for this message queue.
* @msq contains the message queue structure to be modified.
* @msg_queue_associate:
* Check permission when a message queue is requested through the
* msgget system call. This hook is only called when returning the
* message queue identifier for an existing message queue, not when a
* new message queue is created.
* @msq contains the message queue to act upon.
* @msqflg contains the operation control flags.
* Return 0 if permission is granted.
* @msg_queue_msgctl:
* Check permission when a message control operation specified by @cmd
* is to be performed on the message queue @msq.
* The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO.
* @msq contains the message queue to act upon. May be NULL.
* @cmd contains the operation to be performed.
* Return 0 if permission is granted.
* @msg_queue_msgsnd:
* Check permission before a message, @msg, is enqueued on the message
* queue, @msq.
* @msq contains the message queue to send message to.
* @msg contains the message to be enqueued.
* @msqflg contains operational flags.
* Return 0 if permission is granted.
* @msg_queue_msgrcv:
* Check permission before a message, @msg, is removed from the message
* queue, @msq. The @target task structure contains a pointer to the
* process that will be receiving the message (not equal to the current
* process when inline receives are being performed).
* @msq contains the message queue to retrieve message from.
* @msg contains the message destination.
* @target contains the task structure for recipient process.
* @type contains the type of message requested.
* @mode contains the operational flags.
* Return 0 if permission is granted.
*
* Security hooks for System V Shared Memory Segments
*
* @shm_alloc_security:
* Allocate and attach a security structure to the shp->shm_perm.security
* field. The security field is initialized to NULL when the structure is
* first created.
* @shp contains the shared memory structure to be modified.
* Return 0 if operation was successful and permission is granted.
* @shm_free_security:
* Deallocate the security struct for this memory segment.
* @shp contains the shared memory structure to be modified.
* @shm_associate:
* Check permission when a shared memory region is requested through the
* shmget system call. This hook is only called when returning the shared
* memory region identifier for an existing region, not when a new shared
* memory region is created.
* @shp contains the shared memory structure to be modified.
* @shmflg contains the operation control flags.
* Return 0 if permission is granted.
* @shm_shmctl:
* Check permission when a shared memory control operation specified by
* @cmd is to be performed on the shared memory region @shp.
* The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO.
* @shp contains shared memory structure to be modified.
* @cmd contains the operation to be performed.
* Return 0 if permission is granted.
* @shm_shmat:
* Check permissions prior to allowing the shmat system call to attach the
* shared memory segment @shp to the data segment of the calling process.
* The attaching address is specified by @shmaddr.
* @shp contains the shared memory structure to be modified.
* @shmaddr contains the address to attach memory region to.
* @shmflg contains the operational flags.
* Return 0 if permission is granted.
*
* Security hooks for System V Semaphores
*
* @sem_alloc_security:
* Allocate and attach a security structure to the sma->sem_perm.security
* field. The security field is initialized to NULL when the structure is
* first created.
* @sma contains the semaphore structure
* Return 0 if operation was successful and permission is granted.
* @sem_free_security:
* deallocate security struct for this semaphore
* @sma contains the semaphore structure.
* @sem_associate:
* Check permission when a semaphore is requested through the semget
* system call. This hook is only called when returning the semaphore
* identifier for an existing semaphore, not when a new one must be
* created.
* @sma contains the semaphore structure.
* @semflg contains the operation control flags.
* Return 0 if permission is granted.
* @sem_semctl:
* Check permission when a semaphore operation specified by @cmd is to be
* performed on the semaphore @sma. The @sma may be NULL, e.g. for
* IPC_INFO or SEM_INFO.
* @sma contains the semaphore structure. May be NULL.
* @cmd contains the operation to be performed.
* Return 0 if permission is granted.
* @sem_semop:
* Check permissions before performing operations on members of the
* semaphore set @sma. If the @alter flag is nonzero, the semaphore set
* may be modified.
* @sma contains the semaphore structure.
* @sops contains the operations to perform.
* @nsops contains the number of operations to perform.
* @alter contains the flag indicating whether changes are to be made.
* Return 0 if permission is granted.
*
* @binder_set_context_mgr:
* Check whether @mgr is allowed to be the binder context manager.
* @mgr contains the task_struct for the task being registered.
* Return 0 if permission is granted.
* @binder_transaction:
* Check whether @from is allowed to invoke a binder transaction call
* to @to.
* @from contains the task_struct for the sending task.
* @to contains the task_struct for the receiving task.
* @binder_transfer_binder:
* Check whether @from is allowed to transfer a binder reference to @to.
* @from contains the task_struct for the sending task.
* @to contains the task_struct for the receiving task.
* @binder_transfer_file:
* Check whether @from is allowed to transfer @file to @to.
* @from contains the task_struct for the sending task.
* @file contains the struct file being transferred.
* @to contains the task_struct for the receiving task.
*
* @ptrace_access_check:
* Check permission before allowing the current process to trace the
* @child process.
* Security modules may also want to perform a process tracing check
* during an execve in the set_security or apply_creds hooks of
* tracing check during an execve in the bprm_set_creds hook of
* binprm_security_ops if the process is being traced and its security
* attributes would be changed by the execve.
* @child contains the task_struct structure for the target process.
* @mode contains the PTRACE_MODE flags indicating the form of access.
* Return 0 if permission is granted.
* @ptrace_traceme:
* Check that the @parent process has sufficient permission to trace the
* current process before allowing the current process to present itself
* to the @parent process for tracing.
* @parent contains the task_struct structure for debugger process.
* Return 0 if permission is granted.
* @capget:
* Get the @effective, @inheritable, and @permitted capability sets for
* the @target process. The hook may also perform permission checking to
* determine if the current process is allowed to see the capability sets
* of the @target process.
* @target contains the task_struct structure for target process.
* @effective contains the effective capability set.
* @inheritable contains the inheritable capability set.
* @permitted contains the permitted capability set.
* Return 0 if the capability sets were successfully obtained.
* @capset:
* Set the @effective, @inheritable, and @permitted capability sets for
* the current process.
* @new contains the new credentials structure for target process.
* @old contains the current credentials structure for target process.
* @effective contains the effective capability set.
* @inheritable contains the inheritable capability set.
* @permitted contains the permitted capability set.
* Return 0 and update @new if permission is granted.
* @capable:
* Check whether the @tsk process has the @cap capability in the indicated
* credentials.
* @cred contains the credentials to use.
* @ns contains the user namespace we want the capability in
* @cap contains the capability <include/linux/capability.h>.
* @opts contains options for the capable check <include/linux/security.h>
* Return 0 if the capability is granted for @tsk.
* @syslog:
* Check permission before accessing the kernel message ring or changing
* logging to the console.
* See the syslog(2) manual page for an explanation of the @type values.
* @type contains the type of action.
* @from_file indicates the context of action (if it came from /proc).
* Return 0 if permission is granted.
* @settime:
* Check permission to change the system time.
* struct timespec64 is defined in include/linux/time64.h and timezone
* is defined in include/linux/time.h
* @ts contains new time
* @tz contains new timezone
* Return 0 if permission is granted.
* @vm_enough_memory:
* Check permissions for allocating a new virtual mapping.
* @mm contains the mm struct it is being added to.
* @pages contains the number of pages.
* Return 0 if permission is granted.
*
* @ismaclabel:
* Check if the extended attribute specified by @name
* represents a MAC label. Returns 1 if name is a MAC
* attribute otherwise returns 0.
* @name full extended attribute name to check against
* LSM as a MAC label.
*
* @secid_to_secctx:
* Convert secid to security context. If secdata is NULL the length of
* the result will be returned in seclen, but no secdata will be returned.
* This does mean that the length could change between calls to check the
* length and the next call which actually allocates and returns the
* secdata.
* @secid contains the security ID.
* @secdata contains the pointer that stores the converted security
* context.
* @seclen pointer which contains the length of the data
* @secctx_to_secid:
* Convert security context to secid.
* @secid contains the pointer to the generated security ID.
* @secdata contains the security context.
*
* @release_secctx:
* Release the security context.
* @secdata contains the security context.
* @seclen contains the length of the security context.
*
* Security hooks for Audit
*
* @audit_rule_init:
* Allocate and initialize an LSM audit rule structure.
* @field contains the required Audit action.
* Fields flags are defined in include/linux/audit.h
* @op contains the operator the rule uses.
* @rulestr contains the context where the rule will be applied to.
* @lsmrule contains a pointer to receive the result.
* Return 0 if @lsmrule has been successfully set,
* -EINVAL in case of an invalid rule.
*
* @audit_rule_known:
* Specifies whether given @rule contains any fields related to
* current LSM.
* @rule contains the audit rule of interest.
* Return 1 in case of relation found, 0 otherwise.
*
* @audit_rule_match:
* Determine if given @secid matches a rule previously approved
* by @audit_rule_known.
* @secid contains the security id in question.
* @field contains the field which relates to current LSM.
* @op contains the operator that will be used for matching.
* @rule points to the audit rule that will be checked against.
* @actx points to the audit context associated with the check.
* Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure.
*
* @audit_rule_free:
* Deallocate the LSM audit rule structure previously allocated by
* audit_rule_init.
* @rule contains the allocated rule
*
* @inode_invalidate_secctx:
* Notify the security module that it must revalidate the security context
* of an inode.
*
* @inode_notifysecctx:
* Notify the security module of what the security context of an inode
* should be. Initializes the incore security context managed by the
* security module for this inode. Example usage: NFS client invokes
* this hook to initialize the security context in its incore inode to the
* value provided by the server for the file when the server returned the
* file's attributes to the client.
*
* Must be called with inode->i_mutex locked.
*
* @inode we wish to set the security context of.
* @ctx contains the string which we wish to set in the inode.
* @ctxlen contains the length of @ctx.
*
* @inode_setsecctx:
* Change the security context of an inode. Updates the
* incore security context managed by the security module and invokes the
* fs code as needed (via __vfs_setxattr_noperm) to update any backing
* xattrs that represent the context. Example usage: NFS server invokes
* this hook to change the security context in its incore inode and on the
* backing filesystem to a value provided by the client on a SETATTR
* operation.
*
* Must be called with inode->i_mutex locked.
*
* @dentry contains the inode we wish to set the security context of.
* @ctx contains the string which we wish to set in the inode.
* @ctxlen contains the length of @ctx.
*
* @inode_getsecctx:
* On success, returns 0 and fills out @ctx and @ctxlen with the security
* context for the given @inode.
*
* @inode we wish to get the security context of.
* @ctx is a pointer in which to place the allocated security context.
* @ctxlen points to the place to put the length of @ctx.
*
* Security hooks for using the eBPF maps and programs functionalities through
* eBPF syscalls.
*
* @bpf:
* Do a initial check for all bpf syscalls after the attribute is copied
* into the kernel. The actual security module can implement their own
* rules to check the specific cmd they need.
*
* @bpf_map:
* Do a check when the kernel generate and return a file descriptor for
* eBPF maps.
*
* @map: bpf map that we want to access
* @mask: the access flags
*
* @bpf_prog:
* Do a check when the kernel generate and return a file descriptor for
* eBPF programs.
*
* @prog: bpf prog that userspace want to use.
*
* @bpf_map_alloc_security:
* Initialize the security field inside bpf map.
*
* @bpf_map_free_security:
* Clean up the security information stored inside bpf map.
*
* @bpf_prog_alloc_security:
* Initialize the security field inside bpf program.
*
* @bpf_prog_free_security:
* Clean up the security information stored inside bpf prog.
*
*/
union security_list_options {
int (*binder_set_context_mgr)(struct task_struct *mgr);
int (*binder_transaction)(struct task_struct *from,
struct task_struct *to);
int (*binder_transfer_binder)(struct task_struct *from,
struct task_struct *to);
int (*binder_transfer_file)(struct task_struct *from,
struct task_struct *to,
struct file *file);
int (*ptrace_access_check)(struct task_struct *child,
unsigned int mode);
int (*ptrace_traceme)(struct task_struct *parent);
int (*capget)(struct task_struct *target, kernel_cap_t *effective,
kernel_cap_t *inheritable, kernel_cap_t *permitted);
int (*capset)(struct cred *new, const struct cred *old,
const kernel_cap_t *effective,
const kernel_cap_t *inheritable,
const kernel_cap_t *permitted);
int (*capable)(const struct cred *cred,
struct user_namespace *ns,
int cap,
unsigned int opts);
int (*quotactl)(int cmds, int type, int id, struct super_block *sb);
int (*quota_on)(struct dentry *dentry);
int (*syslog)(int type);
int (*settime)(const struct timespec64 *ts, const struct timezone *tz);
int (*vm_enough_memory)(struct mm_struct *mm, long pages);
int (*bprm_set_creds)(struct linux_binprm *bprm);
int (*bprm_check_security)(struct linux_binprm *bprm);
void (*bprm_committing_creds)(struct linux_binprm *bprm);
void (*bprm_committed_creds)(struct linux_binprm *bprm);
int (*sb_alloc_security)(struct super_block *sb);
void (*sb_free_security)(struct super_block *sb);
int (*sb_copy_data)(char *orig, char *copy);
int (*sb_remount)(struct super_block *sb, void *data);
int (*sb_kern_mount)(struct super_block *sb, int flags, void *data);
int (*sb_show_options)(struct seq_file *m, struct super_block *sb);
int (*sb_statfs)(struct dentry *dentry);
int (*sb_mount)(const char *dev_name, const struct path *path,
const char *type, unsigned long flags, void *data);
int (*sb_umount)(struct vfsmount *mnt, int flags);
int (*sb_pivotroot)(const struct path *old_path, const struct path *new_path);
int (*sb_set_mnt_opts)(struct super_block *sb,
struct security_mnt_opts *opts,
unsigned long kern_flags,
unsigned long *set_kern_flags);
int (*sb_clone_mnt_opts)(const struct super_block *oldsb,
struct super_block *newsb,
unsigned long kern_flags,
unsigned long *set_kern_flags);
int (*sb_parse_opts_str)(char *options, struct security_mnt_opts *opts);
int (*dentry_init_security)(struct dentry *dentry, int mode,
const struct qstr *name, void **ctx,
u32 *ctxlen);
int (*dentry_create_files_as)(struct dentry *dentry, int mode,
struct qstr *name,
const struct cred *old,
struct cred *new);
#ifdef CONFIG_SECURITY_PATH
int (*path_unlink)(const struct path *dir, struct dentry *dentry);
int (*path_mkdir)(const struct path *dir, struct dentry *dentry,
umode_t mode);
int (*path_rmdir)(const struct path *dir, struct dentry *dentry);
int (*path_mknod)(const struct path *dir, struct dentry *dentry,
umode_t mode, unsigned int dev);
int (*path_truncate)(const struct path *path);
int (*path_symlink)(const struct path *dir, struct dentry *dentry,
const char *old_name);
int (*path_link)(struct dentry *old_dentry, const struct path *new_dir,
struct dentry *new_dentry);
int (*path_rename)(const struct path *old_dir, struct dentry *old_dentry,
const struct path *new_dir,
struct dentry *new_dentry);
int (*path_chmod)(const struct path *path, umode_t mode);
int (*path_chown)(const struct path *path, kuid_t uid, kgid_t gid);
int (*path_chroot)(const struct path *path);
#endif
int (*inode_alloc_security)(struct inode *inode);
void (*inode_free_security)(struct inode *inode);
int (*inode_init_security)(struct inode *inode, struct inode *dir,
const struct qstr *qstr,
const char **name, void **value,
size_t *len);
int (*inode_create)(struct inode *dir, struct dentry *dentry,
umode_t mode);
int (*inode_link)(struct dentry *old_dentry, struct inode *dir,
struct dentry *new_dentry);
int (*inode_unlink)(struct inode *dir, struct dentry *dentry);
int (*inode_symlink)(struct inode *dir, struct dentry *dentry,
const char *old_name);
int (*inode_mkdir)(struct inode *dir, struct dentry *dentry,
umode_t mode);
int (*inode_rmdir)(struct inode *dir, struct dentry *dentry);
int (*inode_mknod)(struct inode *dir, struct dentry *dentry,
umode_t mode, dev_t dev);
int (*inode_rename)(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir,
struct dentry *new_dentry);
int (*inode_readlink)(struct dentry *dentry);
int (*inode_follow_link)(struct dentry *dentry, struct inode *inode,
bool rcu);
int (*inode_permission)(struct inode *inode, int mask);
int (*inode_setattr)(struct dentry *dentry, struct iattr *attr);
int (*inode_getattr)(const struct path *path);
int (*inode_setxattr)(struct dentry *dentry, const char *name,
const void *value, size_t size, int flags);
void (*inode_post_setxattr)(struct dentry *dentry, const char *name,
const void *value, size_t size,
int flags);
int (*inode_getxattr)(struct dentry *dentry, const char *name);
int (*inode_listxattr)(struct dentry *dentry);
int (*inode_removexattr)(struct dentry *dentry, const char *name);
int (*inode_need_killpriv)(struct dentry *dentry);
int (*inode_killpriv)(struct dentry *dentry);
int (*inode_getsecurity)(struct inode *inode, const char *name,
void **buffer, bool alloc);
int (*inode_setsecurity)(struct inode *inode, const char *name,
const void *value, size_t size,
int flags);
int (*inode_listsecurity)(struct inode *inode, char *buffer,
size_t buffer_size);
void (*inode_getsecid)(struct inode *inode, u32 *secid);
int (*inode_copy_up)(struct dentry *src, struct cred **new);
int (*inode_copy_up_xattr)(const char *name);
int (*file_permission)(struct file *file, int mask);
int (*file_alloc_security)(struct file *file);
void (*file_free_security)(struct file *file);
int (*file_ioctl)(struct file *file, unsigned int cmd,
unsigned long arg);
int (*mmap_addr)(unsigned long addr);
int (*mmap_file)(struct file *file, unsigned long reqprot,
unsigned long prot, unsigned long flags);
int (*file_mprotect)(struct vm_area_struct *vma, unsigned long reqprot,
unsigned long prot);
int (*file_lock)(struct file *file, unsigned int cmd);
int (*file_fcntl)(struct file *file, unsigned int cmd,
unsigned long arg);
void (*file_set_fowner)(struct file *file);
int (*file_send_sigiotask)(struct task_struct *tsk,
struct fown_struct *fown, int sig);
int (*file_receive)(struct file *file);
int (*file_open)(struct file *file, const struct cred *cred);
int (*task_alloc)(struct task_struct *task, unsigned long clone_flags);
void (*task_free)(struct task_struct *task);
int (*cred_alloc_blank)(struct cred *cred, gfp_t gfp);
void (*cred_free)(struct cred *cred);
int (*cred_prepare)(struct cred *new, const struct cred *old,
gfp_t gfp);
void (*cred_transfer)(struct cred *new, const struct cred *old);
int (*kernel_act_as)(struct cred *new, u32 secid);
int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
int (*kernel_module_request)(char *kmod_name);
int (*kernel_read_file)(struct file *file, enum kernel_read_file_id id);
int (*kernel_post_read_file)(struct file *file, char *buf, loff_t size,
enum kernel_read_file_id id);
int (*task_fix_setuid)(struct cred *new, const struct cred *old,
int flags);
int (*task_setpgid)(struct task_struct *p, pid_t pgid);
int (*task_getpgid)(struct task_struct *p);
int (*task_getsid)(struct task_struct *p);
void (*task_getsecid)(struct task_struct *p, u32 *secid);
int (*task_setnice)(struct task_struct *p, int nice);
int (*task_setioprio)(struct task_struct *p, int ioprio);
int (*task_getioprio)(struct task_struct *p);
int (*task_prlimit)(const struct cred *cred, const struct cred *tcred,
unsigned int flags);
int (*task_setrlimit)(struct task_struct *p, unsigned int resource,
struct rlimit *new_rlim);
int (*task_setscheduler)(struct task_struct *p);
int (*task_getscheduler)(struct task_struct *p);
int (*task_movememory)(struct task_struct *p);
int (*task_kill)(struct task_struct *p, struct siginfo *info,
int sig, u32 secid);
int (*task_prctl)(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5);
void (*task_to_inode)(struct task_struct *p, struct inode *inode);
int (*ipc_permission)(struct kern_ipc_perm *ipcp, short flag);
void (*ipc_getsecid)(struct kern_ipc_perm *ipcp, u32 *secid);
int (*msg_msg_alloc_security)(struct msg_msg *msg);
void (*msg_msg_free_security)(struct msg_msg *msg);
int (*msg_queue_alloc_security)(struct msg_queue *msq);
void (*msg_queue_free_security)(struct msg_queue *msq);
int (*msg_queue_associate)(struct msg_queue *msq, int msqflg);
int (*msg_queue_msgctl)(struct msg_queue *msq, int cmd);
int (*msg_queue_msgsnd)(struct msg_queue *msq, struct msg_msg *msg,
int msqflg);
int (*msg_queue_msgrcv)(struct msg_queue *msq, struct msg_msg *msg,
struct task_struct *target, long type,
int mode);
int (*shm_alloc_security)(struct shmid_kernel *shp);
void (*shm_free_security)(struct shmid_kernel *shp);
int (*shm_associate)(struct shmid_kernel *shp, int shmflg);
int (*shm_shmctl)(struct shmid_kernel *shp, int cmd);
int (*shm_shmat)(struct shmid_kernel *shp, char __user *shmaddr,
int shmflg);
int (*sem_alloc_security)(struct sem_array *sma);
void (*sem_free_security)(struct sem_array *sma);
int (*sem_associate)(struct sem_array *sma, int semflg);
int (*sem_semctl)(struct sem_array *sma, int cmd);
int (*sem_semop)(struct sem_array *sma, struct sembuf *sops,
unsigned nsops, int alter);
int (*netlink_send)(struct sock *sk, struct sk_buff *skb);
void (*d_instantiate)(struct dentry *dentry, struct inode *inode);
int (*getprocattr)(struct task_struct *p, char *name, char **value);
int (*setprocattr)(const char *name, void *value, size_t size);
int (*ismaclabel)(const char *name);
int (*secid_to_secctx)(u32 secid, char **secdata, u32 *seclen);
int (*secctx_to_secid)(const char *secdata, u32 seclen, u32 *secid);
void (*release_secctx)(char *secdata, u32 seclen);
void (*inode_invalidate_secctx)(struct inode *inode);
int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen);
int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen);
int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
#ifdef CONFIG_SECURITY_NETWORK
int (*unix_stream_connect)(struct sock *sock, struct sock *other,
struct sock *newsk);
int (*unix_may_send)(struct socket *sock, struct socket *other);
int (*socket_create)(int family, int type, int protocol, int kern);
int (*socket_post_create)(struct socket *sock, int family, int type,
int protocol, int kern);
int (*socket_bind)(struct socket *sock, struct sockaddr *address,
int addrlen);
int (*socket_connect)(struct socket *sock, struct sockaddr *address,
int addrlen);
int (*socket_listen)(struct socket *sock, int backlog);
int (*socket_accept)(struct socket *sock, struct socket *newsock);
int (*socket_sendmsg)(struct socket *sock, struct msghdr *msg,
int size);
int (*socket_recvmsg)(struct socket *sock, struct msghdr *msg,
int size, int flags);
int (*socket_getsockname)(struct socket *sock);
int (*socket_getpeername)(struct socket *sock);
int (*socket_getsockopt)(struct socket *sock, int level, int optname);
int (*socket_setsockopt)(struct socket *sock, int level, int optname);
int (*socket_shutdown)(struct socket *sock, int how);
int (*socket_sock_rcv_skb)(struct sock *sk, struct sk_buff *skb);
int (*socket_getpeersec_stream)(struct socket *sock,
char __user *optval,
int __user *optlen, unsigned len);
int (*socket_getpeersec_dgram)(struct socket *sock,
struct sk_buff *skb, u32 *secid);
int (*sk_alloc_security)(struct sock *sk, int family, gfp_t priority);
void (*sk_free_security)(struct sock *sk);
void (*sk_clone_security)(const struct sock *sk, struct sock *newsk);
void (*sk_getsecid)(struct sock *sk, u32 *secid);
void (*sock_graft)(struct sock *sk, struct socket *parent);
int (*inet_conn_request)(struct sock *sk, struct sk_buff *skb,
struct request_sock *req);
void (*inet_csk_clone)(struct sock *newsk,
const struct request_sock *req);
void (*inet_conn_established)(struct sock *sk, struct sk_buff *skb);
int (*secmark_relabel_packet)(u32 secid);
void (*secmark_refcount_inc)(void);
void (*secmark_refcount_dec)(void);
void (*req_classify_flow)(const struct request_sock *req,
struct flowi *fl);
int (*tun_dev_alloc_security)(void **security);
void (*tun_dev_free_security)(void *security);
int (*tun_dev_create)(void);
int (*tun_dev_attach_queue)(void *security);
int (*tun_dev_attach)(struct sock *sk, void *security);
int (*tun_dev_open)(void *security);
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_INFINIBAND
int (*ib_pkey_access)(void *sec, u64 subnet_prefix, u16 pkey);
int (*ib_endport_manage_subnet)(void *sec, const char *dev_name,
u8 port_num);
int (*ib_alloc_security)(void **sec);
void (*ib_free_security)(void *sec);
#endif /* CONFIG_SECURITY_INFINIBAND */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
int (*xfrm_policy_alloc_security)(struct xfrm_sec_ctx **ctxp,
struct xfrm_user_sec_ctx *sec_ctx,
gfp_t gfp);
int (*xfrm_policy_clone_security)(struct xfrm_sec_ctx *old_ctx,
struct xfrm_sec_ctx **new_ctx);
void (*xfrm_policy_free_security)(struct xfrm_sec_ctx *ctx);
int (*xfrm_policy_delete_security)(struct xfrm_sec_ctx *ctx);
int (*xfrm_state_alloc)(struct xfrm_state *x,
struct xfrm_user_sec_ctx *sec_ctx);
int (*xfrm_state_alloc_acquire)(struct xfrm_state *x,
struct xfrm_sec_ctx *polsec,
u32 secid);
void (*xfrm_state_free_security)(struct xfrm_state *x);
int (*xfrm_state_delete_security)(struct xfrm_state *x);
int (*xfrm_policy_lookup)(struct xfrm_sec_ctx *ctx, u32 fl_secid,
u8 dir);
int (*xfrm_state_pol_flow_match)(struct xfrm_state *x,
struct xfrm_policy *xp,
const struct flowi *fl);
int (*xfrm_decode_session)(struct sk_buff *skb, u32 *secid, int ckall);
#endif /* CONFIG_SECURITY_NETWORK_XFRM */
/* key management security hooks */
#ifdef CONFIG_KEYS
int (*key_alloc)(struct key *key, const struct cred *cred,
unsigned long flags);
void (*key_free)(struct key *key);
int (*key_permission)(key_ref_t key_ref, const struct cred *cred,
unsigned perm);
int (*key_getsecurity)(struct key *key, char **_buffer);
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
int (*audit_rule_init)(u32 field, u32 op, char *rulestr,
void **lsmrule);
int (*audit_rule_known)(struct audit_krule *krule);
int (*audit_rule_match)(u32 secid, u32 field, u32 op, void *lsmrule,
struct audit_context *actx);
void (*audit_rule_free)(void *lsmrule);
#endif /* CONFIG_AUDIT */
#ifdef CONFIG_BPF_SYSCALL
int (*bpf)(int cmd, union bpf_attr *attr,
unsigned int size);
int (*bpf_map)(struct bpf_map *map, fmode_t fmode);
int (*bpf_prog)(struct bpf_prog *prog);
int (*bpf_map_alloc_security)(struct bpf_map *map);
void (*bpf_map_free_security)(struct bpf_map *map);
int (*bpf_prog_alloc_security)(struct bpf_prog_aux *aux);
void (*bpf_prog_free_security)(struct bpf_prog_aux *aux);
#endif /* CONFIG_BPF_SYSCALL */
};
struct security_hook_heads {
struct list_head binder_set_context_mgr;
struct list_head binder_transaction;
struct list_head binder_transfer_binder;
struct list_head binder_transfer_file;
struct list_head ptrace_access_check;
struct list_head ptrace_traceme;
struct list_head capget;
struct list_head capset;
struct list_head capable;
struct list_head quotactl;
struct list_head quota_on;
struct list_head syslog;
struct list_head settime;
struct list_head vm_enough_memory;
struct list_head bprm_set_creds;
struct list_head bprm_check_security;
struct list_head bprm_committing_creds;
struct list_head bprm_committed_creds;
struct list_head sb_alloc_security;
struct list_head sb_free_security;
struct list_head sb_copy_data;
struct list_head sb_remount;
struct list_head sb_kern_mount;
struct list_head sb_show_options;
struct list_head sb_statfs;
struct list_head sb_mount;
struct list_head sb_umount;
struct list_head sb_pivotroot;
struct list_head sb_set_mnt_opts;
struct list_head sb_clone_mnt_opts;
struct list_head sb_parse_opts_str;
struct list_head dentry_init_security;
struct list_head dentry_create_files_as;
#ifdef CONFIG_SECURITY_PATH
struct list_head path_unlink;
struct list_head path_mkdir;
struct list_head path_rmdir;
struct list_head path_mknod;
struct list_head path_truncate;
struct list_head path_symlink;
struct list_head path_link;
struct list_head path_rename;
struct list_head path_chmod;
struct list_head path_chown;
struct list_head path_chroot;
#endif
struct list_head inode_alloc_security;
struct list_head inode_free_security;
struct list_head inode_init_security;
struct list_head inode_create;
struct list_head inode_link;
struct list_head inode_unlink;
struct list_head inode_symlink;
struct list_head inode_mkdir;
struct list_head inode_rmdir;
struct list_head inode_mknod;
struct list_head inode_rename;
struct list_head inode_readlink;
struct list_head inode_follow_link;
struct list_head inode_permission;
struct list_head inode_setattr;
struct list_head inode_getattr;
struct list_head inode_setxattr;
struct list_head inode_post_setxattr;
struct list_head inode_getxattr;
struct list_head inode_listxattr;
struct list_head inode_removexattr;
struct list_head inode_need_killpriv;
struct list_head inode_killpriv;
struct list_head inode_getsecurity;
struct list_head inode_setsecurity;
struct list_head inode_listsecurity;
struct list_head inode_getsecid;
struct list_head inode_copy_up;
struct list_head inode_copy_up_xattr;
struct list_head file_permission;
struct list_head file_alloc_security;
struct list_head file_free_security;
struct list_head file_ioctl;
struct list_head mmap_addr;
struct list_head mmap_file;
struct list_head file_mprotect;
struct list_head file_lock;
struct list_head file_fcntl;
struct list_head file_set_fowner;
struct list_head file_send_sigiotask;
struct list_head file_receive;
struct list_head file_open;
struct list_head task_alloc;
struct list_head task_free;
struct list_head cred_alloc_blank;
struct list_head cred_free;
struct list_head cred_prepare;
struct list_head cred_transfer;
struct list_head kernel_act_as;
struct list_head kernel_create_files_as;
struct list_head kernel_read_file;
struct list_head kernel_post_read_file;
struct list_head kernel_module_request;
struct list_head task_fix_setuid;
struct list_head task_setpgid;
struct list_head task_getpgid;
struct list_head task_getsid;
struct list_head task_getsecid;
struct list_head task_setnice;
struct list_head task_setioprio;
struct list_head task_getioprio;
struct list_head task_prlimit;
struct list_head task_setrlimit;
struct list_head task_setscheduler;
struct list_head task_getscheduler;
struct list_head task_movememory;
struct list_head task_kill;
struct list_head task_prctl;
struct list_head task_to_inode;
struct list_head ipc_permission;
struct list_head ipc_getsecid;
struct list_head msg_msg_alloc_security;
struct list_head msg_msg_free_security;
struct list_head msg_queue_alloc_security;
struct list_head msg_queue_free_security;
struct list_head msg_queue_associate;
struct list_head msg_queue_msgctl;
struct list_head msg_queue_msgsnd;
struct list_head msg_queue_msgrcv;
struct list_head shm_alloc_security;
struct list_head shm_free_security;
struct list_head shm_associate;
struct list_head shm_shmctl;
struct list_head shm_shmat;
struct list_head sem_alloc_security;
struct list_head sem_free_security;
struct list_head sem_associate;
struct list_head sem_semctl;
struct list_head sem_semop;
struct list_head netlink_send;
struct list_head d_instantiate;
struct list_head getprocattr;
struct list_head setprocattr;
struct list_head ismaclabel;
struct list_head secid_to_secctx;
struct list_head secctx_to_secid;
struct list_head release_secctx;
struct list_head inode_invalidate_secctx;
struct list_head inode_notifysecctx;
struct list_head inode_setsecctx;
struct list_head inode_getsecctx;
#ifdef CONFIG_SECURITY_NETWORK
struct list_head unix_stream_connect;
struct list_head unix_may_send;
struct list_head socket_create;
struct list_head socket_post_create;
struct list_head socket_bind;
struct list_head socket_connect;
struct list_head socket_listen;
struct list_head socket_accept;
struct list_head socket_sendmsg;
struct list_head socket_recvmsg;
struct list_head socket_getsockname;
struct list_head socket_getpeername;
struct list_head socket_getsockopt;
struct list_head socket_setsockopt;
struct list_head socket_shutdown;
struct list_head socket_sock_rcv_skb;
struct list_head socket_getpeersec_stream;
struct list_head socket_getpeersec_dgram;
struct list_head sk_alloc_security;
struct list_head sk_free_security;
struct list_head sk_clone_security;
struct list_head sk_getsecid;
struct list_head sock_graft;
struct list_head inet_conn_request;
struct list_head inet_csk_clone;
struct list_head inet_conn_established;
struct list_head secmark_relabel_packet;
struct list_head secmark_refcount_inc;
struct list_head secmark_refcount_dec;
struct list_head req_classify_flow;
struct list_head tun_dev_alloc_security;
struct list_head tun_dev_free_security;
struct list_head tun_dev_create;
struct list_head tun_dev_attach_queue;
struct list_head tun_dev_attach;
struct list_head tun_dev_open;
#endif /* CONFIG_SECURITY_NETWORK */
#ifdef CONFIG_SECURITY_INFINIBAND
struct list_head ib_pkey_access;
struct list_head ib_endport_manage_subnet;
struct list_head ib_alloc_security;
struct list_head ib_free_security;
#endif /* CONFIG_SECURITY_INFINIBAND */
#ifdef CONFIG_SECURITY_NETWORK_XFRM
struct list_head xfrm_policy_alloc_security;
struct list_head xfrm_policy_clone_security;
struct list_head xfrm_policy_free_security;
struct list_head xfrm_policy_delete_security;
struct list_head xfrm_state_alloc;
struct list_head xfrm_state_alloc_acquire;
struct list_head xfrm_state_free_security;
struct list_head xfrm_state_delete_security;
struct list_head xfrm_policy_lookup;
struct list_head xfrm_state_pol_flow_match;
struct list_head xfrm_decode_session;
#endif /* CONFIG_SECURITY_NETWORK_XFRM */
#ifdef CONFIG_KEYS
struct list_head key_alloc;
struct list_head key_free;
struct list_head key_permission;
struct list_head key_getsecurity;
#endif /* CONFIG_KEYS */
#ifdef CONFIG_AUDIT
struct list_head audit_rule_init;
struct list_head audit_rule_known;
struct list_head audit_rule_match;
struct list_head audit_rule_free;
#endif /* CONFIG_AUDIT */
#ifdef CONFIG_BPF_SYSCALL
struct list_head bpf;
struct list_head bpf_map;
struct list_head bpf_prog;
struct list_head bpf_map_alloc_security;
struct list_head bpf_map_free_security;
struct list_head bpf_prog_alloc_security;
struct list_head bpf_prog_free_security;
#endif /* CONFIG_BPF_SYSCALL */
} __randomize_layout;
/*
* Security module hook list structure.
* For use with generic list macros for common operations.
*/
struct security_hook_list {
struct list_head list;
struct list_head *head;
union security_list_options hook;
char *lsm;
int lsm_index;
} __randomize_layout;
/*
* The maximum number of major security modules.
* Used to avoid excessive memory management while
* mapping global and module specific secids.
*
* Currently SELinux, Smack, AppArmor, TOMOYO
* Oh, but Casey needs to come up with the right way
* to identify a "major" module, so use the total number
* of modules (including minor) for now.
* Minor: Capability, Yama, LoadPin
*/
#define LSM_MAX_MAJOR 8
/*
* Security blob size or offset data.
*/
struct lsm_blob_sizes {
int lbs_cred;
int lbs_file;
int lbs_inode;
int lbs_ipc;
int lbs_key;
int lbs_msg_msg;
int lbs_sock;
int lbs_superblock;
int lbs_task;
};
/*
* Initializing a security_hook_list structure takes
* up a lot of space in a source file. This macro takes
* care of the common case and reduces the amount of
* text involved.
*/
#define LSM_HOOK_INIT(HEAD, HOOK) \
{ .head = &security_hook_heads.HEAD, .hook = { .HEAD = HOOK } }
extern struct security_hook_heads security_hook_heads;
extern char *lsm_names;
extern void security_add_blobs(struct lsm_blob_sizes *needed);
extern void security_add_hooks(struct security_hook_list *hooks, int count,
char *lsm);
#ifdef CONFIG_SECURITY_SELINUX_DISABLE
/*
* Assuring the safety of deleting a security module is up to
* the security module involved. This may entail ordering the
* module's hook list in a particular way, refusing to disable
* the module once a policy is loaded or any number of other
* actions better imagined than described.
*
* The name of the configuration option reflects the only module
* that currently uses the mechanism. Any developer who thinks
* disabling their module is a good idea needs to be at least as
* careful as the SELinux team.
*/
static inline void security_delete_hooks(struct security_hook_list *hooks,
int count)
{
int i;
for (i = 0; i < count; i++)
list_del_rcu(&hooks[i].list);
}
#endif /* CONFIG_SECURITY_SELINUX_DISABLE */
/* Currently required to handle SELinux runtime hook disable. */
#ifdef CONFIG_SECURITY_WRITABLE_HOOKS
#define __lsm_ro_after_init
#else
#define __lsm_ro_after_init __ro_after_init
#endif /* CONFIG_SECURITY_WRITABLE_HOOKS */
extern bool __init security_module_enable(const char *lsm, const bool stacked);
extern void __init capability_add_hooks(void);
#ifdef CONFIG_SECURITY_YAMA
extern void __init yama_add_hooks(void);
#else
static inline void __init yama_add_hooks(void) { }
#endif
#ifdef CONFIG_SECURITY_LOADPIN
void __init loadpin_add_hooks(void);
#else
static inline void loadpin_add_hooks(void) { };
#endif
extern int lsm_cred_alloc(struct cred *cred, gfp_t gfp);
extern int lsm_inode_alloc(struct inode *inode);
#ifdef CONFIG_SECURITY
void lsm_early_cred(struct cred *cred);
void lsm_early_inode(struct inode *inode);
#endif
#endif /* ! __LINUX_LSM_HOOKS_H */
|