Viewing file:  bpf.h (30.34 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*/
#ifndef _UAPI__LINUX_BPF_H__
#define _UAPI__LINUX_BPF_H__
#include <linux/types.h>
#include <linux/bpf_common.h>
/* Extended instruction set based on top of classic BPF */
/* instruction classes */
#define BPF_ALU64 0x07 /* alu mode in double word width */
/* ld/ldx fields */
#define BPF_DW 0x18 /* double word */
#define BPF_XADD 0xc0 /* exclusive add */
/* alu/jmp fields */
#define BPF_MOV 0xb0 /* mov reg to reg */
#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */
/* change endianness of a register */
#define BPF_END 0xd0 /* flags for endianness conversion: */
#define BPF_TO_LE 0x00 /* convert to little-endian */
#define BPF_TO_BE 0x08 /* convert to big-endian */
#define BPF_FROM_LE BPF_TO_LE
#define BPF_FROM_BE BPF_TO_BE
/* jmp encodings */
#define BPF_JNE 0x50 /* jump != */
#define BPF_JLT 0xa0 /* LT is unsigned, '<' */
#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */
#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */
#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */
#define BPF_JSLT 0xc0 /* SLT is signed, '<' */
#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */
#define BPF_CALL 0x80 /* function call */
#define BPF_EXIT 0x90 /* function return */
/* Register numbers */
enum {
BPF_REG_0 = 0,
BPF_REG_1,
BPF_REG_2,
BPF_REG_3,
BPF_REG_4,
BPF_REG_5,
BPF_REG_6,
BPF_REG_7,
BPF_REG_8,
BPF_REG_9,
BPF_REG_10,
__MAX_BPF_REG,
};
/* BPF has 10 general purpose 64-bit registers and stack frame. */
#define MAX_BPF_REG __MAX_BPF_REG
struct bpf_insn {
__u8 code; /* opcode */
__u8 dst_reg:4; /* dest register */
__u8 src_reg:4; /* source register */
__s16 off; /* signed offset */
__s32 imm; /* signed immediate constant */
};
/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */
struct bpf_lpm_trie_key {
__u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */
__u8 data[0]; /* Arbitrary size */
};
/* BPF syscall commands, see bpf(2) man-page for details. */
enum bpf_cmd {
BPF_MAP_CREATE,
BPF_MAP_LOOKUP_ELEM,
BPF_MAP_UPDATE_ELEM,
BPF_MAP_DELETE_ELEM,
BPF_MAP_GET_NEXT_KEY,
BPF_PROG_LOAD,
BPF_OBJ_PIN,
BPF_OBJ_GET,
BPF_PROG_ATTACH,
BPF_PROG_DETACH,
BPF_PROG_TEST_RUN,
BPF_PROG_GET_NEXT_ID,
BPF_MAP_GET_NEXT_ID,
BPF_PROG_GET_FD_BY_ID,
BPF_MAP_GET_FD_BY_ID,
BPF_OBJ_GET_INFO_BY_FD,
BPF_PROG_QUERY,
};
enum bpf_map_type {
BPF_MAP_TYPE_UNSPEC,
BPF_MAP_TYPE_HASH,
BPF_MAP_TYPE_ARRAY,
BPF_MAP_TYPE_PROG_ARRAY,
BPF_MAP_TYPE_PERF_EVENT_ARRAY,
BPF_MAP_TYPE_PERCPU_HASH,
BPF_MAP_TYPE_PERCPU_ARRAY,
BPF_MAP_TYPE_STACK_TRACE,
BPF_MAP_TYPE_CGROUP_ARRAY,
BPF_MAP_TYPE_LRU_HASH,
BPF_MAP_TYPE_LRU_PERCPU_HASH,
BPF_MAP_TYPE_LPM_TRIE,
BPF_MAP_TYPE_ARRAY_OF_MAPS,
BPF_MAP_TYPE_HASH_OF_MAPS,
BPF_MAP_TYPE_DEVMAP,
BPF_MAP_TYPE_SOCKMAP,
BPF_MAP_TYPE_CPUMAP,
};
enum bpf_prog_type {
BPF_PROG_TYPE_UNSPEC,
BPF_PROG_TYPE_SOCKET_FILTER,
BPF_PROG_TYPE_KPROBE,
BPF_PROG_TYPE_SCHED_CLS,
BPF_PROG_TYPE_SCHED_ACT,
BPF_PROG_TYPE_TRACEPOINT,
BPF_PROG_TYPE_XDP,
BPF_PROG_TYPE_PERF_EVENT,
BPF_PROG_TYPE_CGROUP_SKB,
BPF_PROG_TYPE_CGROUP_SOCK,
BPF_PROG_TYPE_LWT_IN,
BPF_PROG_TYPE_LWT_OUT,
BPF_PROG_TYPE_LWT_XMIT,
BPF_PROG_TYPE_SOCK_OPS,
BPF_PROG_TYPE_SK_SKB,
BPF_PROG_TYPE_CGROUP_DEVICE,
};
enum bpf_attach_type {
BPF_CGROUP_INET_INGRESS,
BPF_CGROUP_INET_EGRESS,
BPF_CGROUP_INET_SOCK_CREATE,
BPF_CGROUP_SOCK_OPS,
BPF_SK_SKB_STREAM_PARSER,
BPF_SK_SKB_STREAM_VERDICT,
BPF_CGROUP_DEVICE,
__MAX_BPF_ATTACH_TYPE
};
#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
*
* NONE(default): No further bpf programs allowed in the subtree.
*
* BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
* the program in this cgroup yields to sub-cgroup program.
*
* BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
* that cgroup program gets run in addition to the program in this cgroup.
*
* Only one program is allowed to be attached to a cgroup with
* NONE or BPF_F_ALLOW_OVERRIDE flag.
* Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will
* release old program and attach the new one. Attach flags has to match.
*
* Multiple programs are allowed to be attached to a cgroup with
* BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
* (those that were attached first, run first)
* The programs of sub-cgroup are executed first, then programs of
* this cgroup and then programs of parent cgroup.
* When children program makes decision (like picking TCP CA or sock bind)
* parent program has a chance to override it.
*
* A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups.
* A cgroup with NONE doesn't allow any programs in sub-cgroups.
* Ex1:
* cgrp1 (MULTI progs A, B) ->
* cgrp2 (OVERRIDE prog C) ->
* cgrp3 (MULTI prog D) ->
* cgrp4 (OVERRIDE prog E) ->
* cgrp5 (NONE prog F)
* the event in cgrp5 triggers execution of F,D,A,B in that order.
* if prog F is detached, the execution is E,D,A,B
* if prog F and D are detached, the execution is E,A,B
* if prog F, E and D are detached, the execution is C,A,B
*
* All eligible programs are executed regardless of return code from
* earlier programs.
*/
#define BPF_F_ALLOW_OVERRIDE (1U << 0)
#define BPF_F_ALLOW_MULTI (1U << 1)
/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
* verifier will perform strict alignment checking as if the kernel
* has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
* and NET_IP_ALIGN defined to 2.
*/
#define BPF_F_STRICT_ALIGNMENT (1U << 0)
#define BPF_PSEUDO_MAP_FD 1
/* flags for BPF_MAP_UPDATE_ELEM command */
#define BPF_ANY 0 /* create new element or update existing */
#define BPF_NOEXIST 1 /* create new element if it didn't exist */
#define BPF_EXIST 2 /* update existing element */
/* flags for BPF_MAP_CREATE command */
#define BPF_F_NO_PREALLOC (1U << 0)
/* Instead of having one common LRU list in the
* BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list
* which can scale and perform better.
* Note, the LRU nodes (including free nodes) cannot be moved
* across different LRU lists.
*/
#define BPF_F_NO_COMMON_LRU (1U << 1)
/* Specify numa node during map creation */
#define BPF_F_NUMA_NODE (1U << 2)
/* flags for BPF_PROG_QUERY */
#define BPF_F_QUERY_EFFECTIVE (1U << 0)
#define BPF_OBJ_NAME_LEN 16U
/* Flags for accessing BPF object */
#define BPF_F_RDONLY (1U << 3)
#define BPF_F_WRONLY (1U << 4)
union bpf_attr {
struct { /* anonymous struct used by BPF_MAP_CREATE command */
__u32 map_type; /* one of enum bpf_map_type */
__u32 key_size; /* size of key in bytes */
__u32 value_size; /* size of value in bytes */
__u32 max_entries; /* max number of entries in a map */
__u32 map_flags; /* BPF_MAP_CREATE related
* flags defined above.
*/
__u32 inner_map_fd; /* fd pointing to the inner map */
__u32 numa_node; /* numa node (effective only if
* BPF_F_NUMA_NODE is set).
*/
char map_name[BPF_OBJ_NAME_LEN];
};
struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
__u32 map_fd;
__aligned_u64 key;
union {
__aligned_u64 value;
__aligned_u64 next_key;
};
__u64 flags;
};
struct { /* anonymous struct used by BPF_PROG_LOAD command */
__u32 prog_type; /* one of enum bpf_prog_type */
__u32 insn_cnt;
__aligned_u64 insns;
__aligned_u64 license;
__u32 log_level; /* verbosity level of verifier */
__u32 log_size; /* size of user buffer */
__aligned_u64 log_buf; /* user supplied buffer */
__u32 kern_version; /* checked when prog_type=kprobe */
__u32 prog_flags;
char prog_name[BPF_OBJ_NAME_LEN];
__u32 prog_ifindex; /* ifindex of netdev to prep for */
};
struct { /* anonymous struct used by BPF_OBJ_* commands */
__aligned_u64 pathname;
__u32 bpf_fd;
__u32 file_flags;
};
struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
__u32 target_fd; /* container object to attach to */
__u32 attach_bpf_fd; /* eBPF program to attach */
__u32 attach_type;
__u32 attach_flags;
};
struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */
__u32 prog_fd;
__u32 retval;
__u32 data_size_in;
__u32 data_size_out;
__aligned_u64 data_in;
__aligned_u64 data_out;
__u32 repeat;
__u32 duration;
} test;
struct { /* anonymous struct used by BPF_*_GET_*_ID */
union {
__u32 start_id;
__u32 prog_id;
__u32 map_id;
};
__u32 next_id;
__u32 open_flags;
};
struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */
__u32 bpf_fd;
__u32 info_len;
__aligned_u64 info;
} info;
struct { /* anonymous struct used by BPF_PROG_QUERY command */
__u32 target_fd; /* container object to query */
__u32 attach_type;
__u32 query_flags;
__u32 attach_flags;
__aligned_u64 prog_ids;
__u32 prog_cnt;
} query;
} __attribute__((aligned(8)));
/* BPF helper function descriptions:
*
* void *bpf_map_lookup_elem(&map, &key)
* Return: Map value or NULL
*
* int bpf_map_update_elem(&map, &key, &value, flags)
* Return: 0 on success or negative error
*
* int bpf_map_delete_elem(&map, &key)
* Return: 0 on success or negative error
*
* int bpf_probe_read(void *dst, int size, void *src)
* Return: 0 on success or negative error
*
* u64 bpf_ktime_get_ns(void)
* Return: current ktime
*
* int bpf_trace_printk(const char *fmt, int fmt_size, ...)
* Return: length of buffer written or negative error
*
* u32 bpf_prandom_u32(void)
* Return: random value
*
* u32 bpf_raw_smp_processor_id(void)
* Return: SMP processor ID
*
* int bpf_skb_store_bytes(skb, offset, from, len, flags)
* store bytes into packet
* @skb: pointer to skb
* @offset: offset within packet from skb->mac_header
* @from: pointer where to copy bytes from
* @len: number of bytes to store into packet
* @flags: bit 0 - if true, recompute skb->csum
* other bits - reserved
* Return: 0 on success or negative error
*
* int bpf_l3_csum_replace(skb, offset, from, to, flags)
* recompute IP checksum
* @skb: pointer to skb
* @offset: offset within packet where IP checksum is located
* @from: old value of header field
* @to: new value of header field
* @flags: bits 0-3 - size of header field
* other bits - reserved
* Return: 0 on success or negative error
*
* int bpf_l4_csum_replace(skb, offset, from, to, flags)
* recompute TCP/UDP checksum
* @skb: pointer to skb
* @offset: offset within packet where TCP/UDP checksum is located
* @from: old value of header field
* @to: new value of header field
* @flags: bits 0-3 - size of header field
* bit 4 - is pseudo header
* other bits - reserved
* Return: 0 on success or negative error
*
* int bpf_tail_call(ctx, prog_array_map, index)
* jump into another BPF program
* @ctx: context pointer passed to next program
* @prog_array_map: pointer to map which type is BPF_MAP_TYPE_PROG_ARRAY
* @index: 32-bit index inside array that selects specific program to run
* Return: 0 on success or negative error
*
* int bpf_clone_redirect(skb, ifindex, flags)
* redirect to another netdev
* @skb: pointer to skb
* @ifindex: ifindex of the net device
* @flags: bit 0 - if set, redirect to ingress instead of egress
* other bits - reserved
* Return: 0 on success or negative error
*
* u64 bpf_get_current_pid_tgid(void)
* Return: current->tgid << 32 | current->pid
*
* u64 bpf_get_current_uid_gid(void)
* Return: current_gid << 32 | current_uid
*
* int bpf_get_current_comm(char *buf, int size_of_buf)
* stores current->comm into buf
* Return: 0 on success or negative error
*
* u32 bpf_get_cgroup_classid(skb)
* retrieve a proc's classid
* @skb: pointer to skb
* Return: classid if != 0
*
* int bpf_skb_vlan_push(skb, vlan_proto, vlan_tci)
* Return: 0 on success or negative error
*
* int bpf_skb_vlan_pop(skb)
* Return: 0 on success or negative error
*
* int bpf_skb_get_tunnel_key(skb, key, size, flags)
* int bpf_skb_set_tunnel_key(skb, key, size, flags)
* retrieve or populate tunnel metadata
* @skb: pointer to skb
* @key: pointer to 'struct bpf_tunnel_key'
* @size: size of 'struct bpf_tunnel_key'
* @flags: room for future extensions
* Return: 0 on success or negative error
*
* u64 bpf_perf_event_read(map, flags)
* read perf event counter value
* @map: pointer to perf_event_array map
* @flags: index of event in the map or bitmask flags
* Return: value of perf event counter read or error code
*
* int bpf_redirect(ifindex, flags)
* redirect to another netdev
* @ifindex: ifindex of the net device
* @flags:
* cls_bpf:
* bit 0 - if set, redirect to ingress instead of egress
* other bits - reserved
* xdp_bpf:
* all bits - reserved
* Return: cls_bpf: TC_ACT_REDIRECT on success or TC_ACT_SHOT on error
* xdp_bfp: XDP_REDIRECT on success or XDP_ABORT on error
* int bpf_redirect_map(map, key, flags)
* redirect to endpoint in map
* @map: pointer to dev map
* @key: index in map to lookup
* @flags: --
* Return: XDP_REDIRECT on success or XDP_ABORT on error
*
* u32 bpf_get_route_realm(skb)
* retrieve a dst's tclassid
* @skb: pointer to skb
* Return: realm if != 0
*
* int bpf_perf_event_output(ctx, map, flags, data, size)
* output perf raw sample
* @ctx: struct pt_regs*
* @map: pointer to perf_event_array map
* @flags: index of event in the map or bitmask flags
* @data: data on stack to be output as raw data
* @size: size of data
* Return: 0 on success or negative error
*
* int bpf_get_stackid(ctx, map, flags)
* walk user or kernel stack and return id
* @ctx: struct pt_regs*
* @map: pointer to stack_trace map
* @flags: bits 0-7 - numer of stack frames to skip
* bit 8 - collect user stack instead of kernel
* bit 9 - compare stacks by hash only
* bit 10 - if two different stacks hash into the same stackid
* discard old
* other bits - reserved
* Return: >= 0 stackid on success or negative error
*
* s64 bpf_csum_diff(from, from_size, to, to_size, seed)
* calculate csum diff
* @from: raw from buffer
* @from_size: length of from buffer
* @to: raw to buffer
* @to_size: length of to buffer
* @seed: optional seed
* Return: csum result or negative error code
*
* int bpf_skb_get_tunnel_opt(skb, opt, size)
* retrieve tunnel options metadata
* @skb: pointer to skb
* @opt: pointer to raw tunnel option data
* @size: size of @opt
* Return: option size
*
* int bpf_skb_set_tunnel_opt(skb, opt, size)
* populate tunnel options metadata
* @skb: pointer to skb
* @opt: pointer to raw tunnel option data
* @size: size of @opt
* Return: 0 on success or negative error
*
* int bpf_skb_change_proto(skb, proto, flags)
* Change protocol of the skb. Currently supported is v4 -> v6,
* v6 -> v4 transitions. The helper will also resize the skb. eBPF
* program is expected to fill the new headers via skb_store_bytes
* and lX_csum_replace.
* @skb: pointer to skb
* @proto: new skb->protocol type
* @flags: reserved
* Return: 0 on success or negative error
*
* int bpf_skb_change_type(skb, type)
* Change packet type of skb.
* @skb: pointer to skb
* @type: new skb->pkt_type type
* Return: 0 on success or negative error
*
* int bpf_skb_under_cgroup(skb, map, index)
* Check cgroup2 membership of skb
* @skb: pointer to skb
* @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
* @index: index of the cgroup in the bpf_map
* Return:
* == 0 skb failed the cgroup2 descendant test
* == 1 skb succeeded the cgroup2 descendant test
* < 0 error
*
* u32 bpf_get_hash_recalc(skb)
* Retrieve and possibly recalculate skb->hash.
* @skb: pointer to skb
* Return: hash
*
* u64 bpf_get_current_task(void)
* Returns current task_struct
* Return: current
*
* int bpf_probe_write_user(void *dst, void *src, int len)
* safely attempt to write to a location
* @dst: destination address in userspace
* @src: source address on stack
* @len: number of bytes to copy
* Return: 0 on success or negative error
*
* int bpf_current_task_under_cgroup(map, index)
* Check cgroup2 membership of current task
* @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
* @index: index of the cgroup in the bpf_map
* Return:
* == 0 current failed the cgroup2 descendant test
* == 1 current succeeded the cgroup2 descendant test
* < 0 error
*
* int bpf_skb_change_tail(skb, len, flags)
* The helper will resize the skb to the given new size, to be used f.e.
* with control messages.
* @skb: pointer to skb
* @len: new skb length
* @flags: reserved
* Return: 0 on success or negative error
*
* int bpf_skb_pull_data(skb, len)
* The helper will pull in non-linear data in case the skb is non-linear
* and not all of len are part of the linear section. Only needed for
* read/write with direct packet access.
* @skb: pointer to skb
* @len: len to make read/writeable
* Return: 0 on success or negative error
*
* s64 bpf_csum_update(skb, csum)
* Adds csum into skb->csum in case of CHECKSUM_COMPLETE.
* @skb: pointer to skb
* @csum: csum to add
* Return: csum on success or negative error
*
* void bpf_set_hash_invalid(skb)
* Invalidate current skb->hash.
* @skb: pointer to skb
*
* int bpf_get_numa_node_id()
* Return: Id of current NUMA node.
*
* int bpf_skb_change_head()
* Grows headroom of skb and adjusts MAC header offset accordingly.
* Will extends/reallocae as required automatically.
* May change skb data pointer and will thus invalidate any check
* performed for direct packet access.
* @skb: pointer to skb
* @len: length of header to be pushed in front
* @flags: Flags (unused for now)
* Return: 0 on success or negative error
*
* int bpf_xdp_adjust_head(xdp_md, delta)
* Adjust the xdp_md.data by delta
* @xdp_md: pointer to xdp_md
* @delta: An positive/negative integer to be added to xdp_md.data
* Return: 0 on success or negative on error
*
* int bpf_probe_read_str(void *dst, int size, const void *unsafe_ptr)
* Copy a NUL terminated string from unsafe address. In case the string
* length is smaller than size, the target is not padded with further NUL
* bytes. In case the string length is larger than size, just count-1
* bytes are copied and the last byte is set to NUL.
* @dst: destination address
* @size: maximum number of bytes to copy, including the trailing NUL
* @unsafe_ptr: unsafe address
* Return:
* > 0 length of the string including the trailing NUL on success
* < 0 error
*
* u64 bpf_get_socket_cookie(skb)
* Get the cookie for the socket stored inside sk_buff.
* @skb: pointer to skb
* Return: 8 Bytes non-decreasing number on success or 0 if the socket
* field is missing inside sk_buff
*
* u32 bpf_get_socket_uid(skb)
* Get the owner uid of the socket stored inside sk_buff.
* @skb: pointer to skb
* Return: uid of the socket owner on success or overflowuid if failed.
*
* u32 bpf_set_hash(skb, hash)
* Set full skb->hash.
* @skb: pointer to skb
* @hash: hash to set
*
* int bpf_setsockopt(bpf_socket, level, optname, optval, optlen)
* Calls setsockopt. Not all opts are available, only those with
* integer optvals plus TCP_CONGESTION.
* Supported levels: SOL_SOCKET and IPPROTO_TCP
* @bpf_socket: pointer to bpf_socket
* @level: SOL_SOCKET or IPPROTO_TCP
* @optname: option name
* @optval: pointer to option value
* @optlen: length of optval in bytes
* Return: 0 or negative error
*
* int bpf_getsockopt(bpf_socket, level, optname, optval, optlen)
* Calls getsockopt. Not all opts are available.
* Supported levels: IPPROTO_TCP
* @bpf_socket: pointer to bpf_socket
* @level: IPPROTO_TCP
* @optname: option name
* @optval: pointer to option value
* @optlen: length of optval in bytes
* Return: 0 or negative error
*
* int bpf_skb_adjust_room(skb, len_diff, mode, flags)
* Grow or shrink room in sk_buff.
* @skb: pointer to skb
* @len_diff: (signed) amount of room to grow/shrink
* @mode: operation mode (enum bpf_adj_room_mode)
* @flags: reserved for future use
* Return: 0 on success or negative error code
*
* int bpf_sk_redirect_map(map, key, flags)
* Redirect skb to a sock in map using key as a lookup key for the
* sock in map.
* @map: pointer to sockmap
* @key: key to lookup sock in map
* @flags: reserved for future use
* Return: SK_PASS
*
* int bpf_sock_map_update(skops, map, key, flags)
* @skops: pointer to bpf_sock_ops
* @map: pointer to sockmap to update
* @key: key to insert/update sock in map
* @flags: same flags as map update elem
*
* int bpf_xdp_adjust_meta(xdp_md, delta)
* Adjust the xdp_md.data_meta by delta
* @xdp_md: pointer to xdp_md
* @delta: An positive/negative integer to be added to xdp_md.data_meta
* Return: 0 on success or negative on error
*
* int bpf_perf_event_read_value(map, flags, buf, buf_size)
* read perf event counter value and perf event enabled/running time
* @map: pointer to perf_event_array map
* @flags: index of event in the map or bitmask flags
* @buf: buf to fill
* @buf_size: size of the buf
* Return: 0 on success or negative error code
*
* int bpf_perf_prog_read_value(ctx, buf, buf_size)
* read perf prog attached perf event counter and enabled/running time
* @ctx: pointer to ctx
* @buf: buf to fill
* @buf_size: size of the buf
* Return : 0 on success or negative error code
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
FN(map_lookup_elem), \
FN(map_update_elem), \
FN(map_delete_elem), \
FN(probe_read), \
FN(ktime_get_ns), \
FN(trace_printk), \
FN(get_prandom_u32), \
FN(get_smp_processor_id), \
FN(skb_store_bytes), \
FN(l3_csum_replace), \
FN(l4_csum_replace), \
FN(tail_call), \
FN(clone_redirect), \
FN(get_current_pid_tgid), \
FN(get_current_uid_gid), \
FN(get_current_comm), \
FN(get_cgroup_classid), \
FN(skb_vlan_push), \
FN(skb_vlan_pop), \
FN(skb_get_tunnel_key), \
FN(skb_set_tunnel_key), \
FN(perf_event_read), \
FN(redirect), \
FN(get_route_realm), \
FN(perf_event_output), \
FN(skb_load_bytes), \
FN(get_stackid), \
FN(csum_diff), \
FN(skb_get_tunnel_opt), \
FN(skb_set_tunnel_opt), \
FN(skb_change_proto), \
FN(skb_change_type), \
FN(skb_under_cgroup), \
FN(get_hash_recalc), \
FN(get_current_task), \
FN(probe_write_user), \
FN(current_task_under_cgroup), \
FN(skb_change_tail), \
FN(skb_pull_data), \
FN(csum_update), \
FN(set_hash_invalid), \
FN(get_numa_node_id), \
FN(skb_change_head), \
FN(xdp_adjust_head), \
FN(probe_read_str), \
FN(get_socket_cookie), \
FN(get_socket_uid), \
FN(set_hash), \
FN(setsockopt), \
FN(skb_adjust_room), \
FN(redirect_map), \
FN(sk_redirect_map), \
FN(sock_map_update), \
FN(xdp_adjust_meta), \
FN(perf_event_read_value), \
FN(perf_prog_read_value), \
FN(getsockopt),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
*/
#define __BPF_ENUM_FN(x) BPF_FUNC_ ## x
enum bpf_func_id {
__BPF_FUNC_MAPPER(__BPF_ENUM_FN)
__BPF_FUNC_MAX_ID,
};
#undef __BPF_ENUM_FN
/* All flags used by eBPF helper functions, placed here. */
/* BPF_FUNC_skb_store_bytes flags. */
#define BPF_F_RECOMPUTE_CSUM (1ULL << 0)
#define BPF_F_INVALIDATE_HASH (1ULL << 1)
/* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags.
* First 4 bits are for passing the header field size.
*/
#define BPF_F_HDR_FIELD_MASK 0xfULL
/* BPF_FUNC_l4_csum_replace flags. */
#define BPF_F_PSEUDO_HDR (1ULL << 4)
#define BPF_F_MARK_MANGLED_0 (1ULL << 5)
#define BPF_F_MARK_ENFORCE (1ULL << 6)
/* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */
#define BPF_F_INGRESS (1ULL << 0)
/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */
#define BPF_F_TUNINFO_IPV6 (1ULL << 0)
/* BPF_FUNC_get_stackid flags. */
#define BPF_F_SKIP_FIELD_MASK 0xffULL
#define BPF_F_USER_STACK (1ULL << 8)
#define BPF_F_FAST_STACK_CMP (1ULL << 9)
#define BPF_F_REUSE_STACKID (1ULL << 10)
/* BPF_FUNC_skb_set_tunnel_key flags. */
#define BPF_F_ZERO_CSUM_TX (1ULL << 1)
#define BPF_F_DONT_FRAGMENT (1ULL << 2)
/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and
* BPF_FUNC_perf_event_read_value flags.
*/
#define BPF_F_INDEX_MASK 0xffffffffULL
#define BPF_F_CURRENT_CPU BPF_F_INDEX_MASK
/* BPF_FUNC_perf_event_output for sk_buff input context. */
#define BPF_F_CTXLEN_MASK (0xfffffULL << 32)
/* Mode for BPF_FUNC_skb_adjust_room helper. */
enum bpf_adj_room_mode {
BPF_ADJ_ROOM_NET,
};
/* user accessible mirror of in-kernel sk_buff.
* new fields can only be added to the end of this structure
*/
struct __sk_buff {
__u32 len;
__u32 pkt_type;
__u32 mark;
__u32 queue_mapping;
__u32 protocol;
__u32 vlan_present;
__u32 vlan_tci;
__u32 vlan_proto;
__u32 priority;
__u32 ingress_ifindex;
__u32 ifindex;
__u32 tc_index;
__u32 cb[5];
__u32 hash;
__u32 tc_classid;
__u32 data;
__u32 data_end;
__u32 napi_id;
/* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */
__u32 family;
__u32 remote_ip4; /* Stored in network byte order */
__u32 local_ip4; /* Stored in network byte order */
__u32 remote_ip6[4]; /* Stored in network byte order */
__u32 local_ip6[4]; /* Stored in network byte order */
__u32 remote_port; /* Stored in network byte order */
__u32 local_port; /* stored in host byte order */
/* ... here. */
__u32 data_meta;
};
struct bpf_tunnel_key {
__u32 tunnel_id;
union {
__u32 remote_ipv4;
__u32 remote_ipv6[4];
};
__u8 tunnel_tos;
__u8 tunnel_ttl;
__u16 tunnel_ext;
__u32 tunnel_label;
};
/* Generic BPF return codes which all BPF program types may support.
* The values are binary compatible with their TC_ACT_* counter-part to
* provide backwards compatibility with existing SCHED_CLS and SCHED_ACT
* programs.
*
* XDP is handled seprately, see XDP_*.
*/
enum bpf_ret_code {
BPF_OK = 0,
/* 1 reserved */
BPF_DROP = 2,
/* 3-6 reserved */
BPF_REDIRECT = 7,
/* >127 are reserved for prog type specific return codes */
};
struct bpf_sock {
__u32 bound_dev_if;
__u32 family;
__u32 type;
__u32 protocol;
__u32 mark;
__u32 priority;
};
#define XDP_PACKET_HEADROOM 256
/* User return codes for XDP prog type.
* A valid XDP program must return one of these defined values. All other
* return codes are reserved for future use. Unknown return codes will
* result in packet drops and a warning via bpf_warn_invalid_xdp_action().
*/
enum xdp_action {
XDP_ABORTED = 0,
XDP_DROP,
XDP_PASS,
XDP_TX,
XDP_REDIRECT,
};
/* user accessible metadata for XDP packet hook
* new fields must be added to the end of this structure
*/
struct xdp_md {
__u32 data;
__u32 data_end;
__u32 data_meta;
};
enum sk_action {
SK_DROP = 0,
SK_PASS,
};
#define BPF_TAG_SIZE 8
struct bpf_prog_info {
__u32 type;
__u32 id;
__u8 tag[BPF_TAG_SIZE];
__u32 jited_prog_len;
__u32 xlated_prog_len;
__aligned_u64 jited_prog_insns;
__aligned_u64 xlated_prog_insns;
__u64 load_time; /* ns since boottime */
__u32 created_by_uid;
__u32 nr_map_ids;
__aligned_u64 map_ids;
char name[BPF_OBJ_NAME_LEN];
} __attribute__((aligned(8)));
struct bpf_map_info {
__u32 type;
__u32 id;
__u32 key_size;
__u32 value_size;
__u32 max_entries;
__u32 map_flags;
char name[BPF_OBJ_NAME_LEN];
} __attribute__((aligned(8)));
/* User bpf_sock_ops struct to access socket values and specify request ops
* and their replies.
* Some of this fields are in network (bigendian) byte order and may need
* to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h).
* New fields can only be added at the end of this structure
*/
struct bpf_sock_ops {
__u32 op;
union {
__u32 reply;
__u32 replylong[4];
};
__u32 family;
__u32 remote_ip4; /* Stored in network byte order */
__u32 local_ip4; /* Stored in network byte order */
__u32 remote_ip6[4]; /* Stored in network byte order */
__u32 local_ip6[4]; /* Stored in network byte order */
__u32 remote_port; /* Stored in network byte order */
__u32 local_port; /* stored in host byte order */
};
/* List of known BPF sock_ops operators.
* New entries can only be added at the end
*/
enum {
BPF_SOCK_OPS_VOID,
BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or
* -1 if default value should be used
*/
BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized
* window (in packets) or -1 if default
* value should be used
*/
BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an
* active connection is initialized
*/
BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an
* active connection is
* established
*/
BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a
* passive connection is
* established
*/
BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control
* needs ECN
*/
BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is
* based on the path and may be
* dependent on the congestion control
* algorithm. In general it indicates
* a congestion threshold. RTTs above
* this indicate congestion
*/
};
#define TCP_BPF_IW 1001 /* Set TCP initial congestion window */
#define TCP_BPF_SNDCWND_CLAMP 1002 /* Set sndcwnd_clamp */
struct bpf_perf_event_value {
__u64 counter;
__u64 enabled;
__u64 running;
};
#define BPF_DEVCG_ACC_MKNOD (1ULL << 0)
#define BPF_DEVCG_ACC_READ (1ULL << 1)
#define BPF_DEVCG_ACC_WRITE (1ULL << 2)
#define BPF_DEVCG_DEV_BLOCK (1ULL << 0)
#define BPF_DEVCG_DEV_CHAR (1ULL << 1)
struct bpf_cgroup_dev_ctx {
/* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */
__u32 access_type;
__u32 major;
__u32 minor;
};
#endif /* _UAPI__LINUX_BPF_H__ */
|